100% Free NS0-527 Files For passing the exam Quickly UPDATED Jul 27, 2023
NS0-527 Dumps Questions Study Exam Guide
NetApp NS0-527 Exam Topics:
| Section | Objectives |
|---|---|
| NetApp Data Protection Software | - Describe how to install NetApp data protection software - Demonstrate knowledge of how to administer NetApp data protection software |
| NetApp ONTAP Replication Solutions | - Describe SnapMirror technologies - Demonstrate how to administer hybrid cloud data protection solutions |
| Data Protection Design Solutions | - Describe how to design data protection solutions - Describe the use of Snapshot technology - Describe network connectivity requirements |
NEW QUESTION # 77
Click the Exhibit button.
Referring to the exhibit, what must be performed on nodes aff-01 and aff-02 to allow them to failover and giveback properly?
- A. Move the LIFs to their home ports.
- B. Disconnect the HA connection between the nodes.
- C. Reboot aff-02 to resolve the LIF issue.
- D. No additional action is necessary.
Answer: A
NEW QUESTION # 78
Click the Exhibit button on the right.
Referring to the exhibit, which two tiers are monitored in the volume capacity? (Choose two)
- A. performance
- B. licensed
- C. capacity
- D. metadata
Answer: A,C
NEW QUESTION # 79
A client is planning to configure a SnapMirror relationship between two sites. Normally their ISP provides network throughput of 100 Mbps; however, they can arrange to have this burst to 1 Gbps for a period of time at an additional cost.
Their intention is to back up 400 GB of Snapshot data each day using the burst option to keep the replication time to a minimum. In this scenario, how much burst time do they need to purchase?
- A. 30 minutes
- B. 45 minutes
- C. 15 minutes
- D. 60 minutes
Answer: D
NEW QUESTION # 80
Click the Exhibit button.
An employee's computer and mapped home folder has been encrypted with ransomware. You are asked to restore the data from a SnapVault repository.
Referring to the exhibit, what happens when the volume is restored?
- A. The original data is decrypted in place.
- B. All files in the volume are restored.
- C. The restore is performed locally.
- D. Only files that have changed in the volume are restored.
Answer: B
NEW QUESTION # 81
A customer has a 2-node ONTAP Select HA cluster deployed on the same site. The ONTAP Deploy VM has been accidentally deleted. The 2-node ONTAP Select HA cluster is still serving data, but the storage failover capability has been disabled.
In this scenario, what would you do to reestablish the storage failover capability on your cluster?
- A. Deploy a secondary ONTAP Deploy VM and restore the 2-node cluster quorum.
- B. Deploy two single-node ONTAP Select clusters and migrate all exiting data.
- C. Deploy two ONTAP Deploy VMs and a new 2-node ONTAP Select cluster and then migrate the data.
- D. Deploy a new 4-node ONTAP Select cluster and distribute data from the existing cluster.
Answer: B
NEW QUESTION # 82
For DR purposes, data must be replicated between on-premises clusters and multiple public clouds. In this scenario, which solution would simplify management?
- A. Cloud Insights
- B. Cloud Volumes ONTAP
- C. Cloud Manager
- D. Cloud Sync
Answer: C
NEW QUESTION # 83
You must back up and replicate a Microsoft SQL server using SnapProtect in your clustered Data ONTAP environment.
Which three components must be correctly installed and configured? (Choose three.)
- A. On Command Workflow Automation
- B. SnapDrive for Windows
- C. SnapProtect v10
- D. SnapProtectiDataAgent
- E. On Command Unified Manager 6.0
Answer: A,D,E
NEW QUESTION # 84
You want to provide your team with a SnapProtect report that shows how many backups succeeded, were delayed, and failed over the last 30 days. You also want detailed information about the jobs, agents, and clients.
WhichCommCell report provides the necessary information?
- A. Activity
- B. Backup Job Summary
- C. SLA
- D. Health
Answer: B
NEW QUESTION # 85
Click the Exhibit button.
Your customer has recently implemented a FabricPool solution that uses the default configuration. They notice that no data has moved to the cloud tier. Your customer is concerned that FabricPool might not be functioning properly.
Referring to the exhibit, what is causing the problem?
- A. The performance tier is not 50% full.
- B. The performance tier is not 100% full.
- C. The performance tier is not 75% full.
- D. The performance tier is not 90% full.
Answer: A
NEW QUESTION # 86
You are installing a MetroCluster for clustered Data ONTAP consisting of FAS8080s.
How are the high-availability interconnects cabled?
- A. High-availability interconnects between the nodes are not needed.
- B. High-availability interconnects are cabled both locally and remotely between thenodes.
- C. High-availability interconnects are only needed for the remote connections between the nodes.
- D. Each high-availability pair controller is cabled to its local partner.
Answer: B
NEW QUESTION # 87
You have a FAS9000 with 10 TBNL-SAS drives that is replicating to a FAS8200 with 4 TB NL-SAS drives. An 80 TB source volume on the FAS9000 is showing 50% storage efficiency. After that volume mirror is initialized, the FAS8200 destination volume is showing only 10% storage efficiency.
In this scenario, why is storage efficiency reduced after replication?
- A. The source volume has inline deduplication enabled.
- B. The different sized drives use different efficiency methods.
- C. The different controller models require logical replication.
- D. The destination volume has post process compression enabled.
Answer: B
NEW QUESTION # 88
A customer wants to enforce prompt tiering when the cooling threshold has been reached.
They want to do this even though the data may have been deleted or the data continues to exist in the primary file system.
In this scenario, which tiering policy should be used?
- A. Auto
- B. None
- C. Snapshot-only
- D. Backup
Answer: A
NEW QUESTION # 89
A customer wants to modify the retentioncount of the SnapVault destination volume.
Which policy should be used modify the attribute?
- A. Efficiency policy
- B. Snapshot policy
- C. SnapMirror policy
- D. Volume policy
Answer: C
NEW QUESTION # 90
You are upgrading your Data ONTAP cluster from clustered Data ONTAP 8.3 to clustered Data ONTAP 9.1.
Which two actions must be performed for the SnapMirror relationships?
(Choose two.)
- A. Delete and re-create SnapMirror relationships.
- B. Delete the obsolete SnapMirror Snapshot copies which were created in Data ONTAP 8.3.
- C. Break existing SnapMirror relationships.
- D. After the upgrade, resynchronize, and resume SnapMirror relationships.
Answer: C,D
NEW QUESTION # 91
After deploying an ONTAP Select 2 node HA cluster at a remote site, you successfully perform manual takeover and giveback before placing the cluster into production. After the cluster runs in production for a week, you notice that you can no longer perform a manual takeover.
In this scenario, what are two causes of this problem? (Choose two.)
- A. The vSphere HA service has failed.
- B. The HA interconnect cables have been removed.
- C. ONTAP Deploy has been deleted.
- D. There is a network disruption between sites.
Answer: B,D
NEW QUESTION # 92
A customer hassetup an SVM DR relationship to provide disaster recovery capability at the SVM level.
The secondary site has a different network configuration. They want to replicate the protocol and services configuration of the primary SVM to the secondary SVM when creating the SVM DR relationship.
Which two actions will accomplish this task? (Choose two.)
- A. Set the discard configuration network option.
- B. Set the vserver-dr-protection unprotected option.
- C. Set the identity preserve option to false.
- D. Set the identity preserve option to true.
Answer: A,D
NEW QUESTION # 93
You want to determine the amount of cold data that can be tiered from a FabricPool-enabled aggregate.
In thisscenario, which feature satisfies this requirement?
- A. Inactive Data Reporting
- B. Information Lifecycle Management
- C. Auto Balance
- D. Object Store Profiler
Answer: A
Explanation:
Explanation
First available in ONTAP 9.4, inactive data reporting (IDR) is an excellent tool for determining the amount of inactive (cold) data that can be tiered from an aggregate. IDR is enabled by default on FabricPool aggregates.
More important, you can enable it on non-FabricPool aggregates by using the ONTAP CLI, to get visibility on how much youcan gain by deploying FabricPool.
NEW QUESTION # 94
A customer is running multiple Oracle DBs over NFS. The volumes are replicated using
SnapMirror to a secondary site, which also hosts the development and test systems. They want to streamline the creation of test environments on the secondary site so that they will not have to manually use FlexClone to clone multiple volumes for each request.
In this scenario, which tool satisfies these requirements?
- A. NetApp Service Level Manager
- B. Snap Creator Framework
- C. OnCommand Workflow Automation
- D. OnCommand Unified Manager
Answer: B
NEW QUESTION # 95
Which NetApp technology helps to protect against ransomware attacks?
- A. NetApp Aggregate Encryption
- B. SnapLock
- C. NetApp Volume Encryption
- D. SyncMirror
Answer: B
NEW QUESTION # 96
Click the Exhibit button.
A customer wants to ensure that their volumes are protected. In ONTAP System Manager, under the Protectionsection, you see the screen that is shown in the exhibit. The company has an asynchronous mirror policy of less than a 60-minute lag.
Referring to the exhibit, which volume has a lag that exceeds the company policy?
- A. svm_fabricpool:demo_volume -> svm_fabricpool:demo_volume_dest
- B. svm_fabricpool:demo_volume -> svm_fabricpool:demo_volume_DR
- C. svm_fabricpool:project_b -> svm_fabricpool:project_b_dest
- D. svm_fabricpool:project_a -> svm_fabricpool:project_a_dest
Answer: B
NEW QUESTION # 97
A previous administrator had configured an external backup system to use node-scoped NDMP for backups, but you want to change this system to use SVM-scoped NDMP. How do you make this change in ONTAP?
- A. Restart the NDMP service on the SVMs being backed up.
- B. Turn off node-scoped NDMP on the cluster.
- C. Turn off node-scoped NDMP on the SVMs being backed up.
- D. Restart the NDMP service on the cluster.
Answer: B
NEW QUESTION # 98
You have a 2-node FAS9000 cluster that must replicate to a 2-node AFF A300 cluster. Both clusters use self-encrypting drives (SEDs) and need toencrypt all data at rest using centralized key management.
Which two features accomplish this task? (Choose two.)
- A. NetApp Volume Encryption (NVE)
- B. Onboard Key Management
- C. NetApp Storage Encryption (NSE)
- D. External Key Management
Answer: A,D
NEW QUESTION # 99
......
NS0-527 Premium Exam Engine - Download Free PDF Questions: https://www.verifieddumps.com/NS0-527-valid-exam-braindumps.html
Instant Download NS0-527 Free Updated Test Dumps: https://drive.google.com/open?id=1XSCbO_R42huO2nrMGpaRsssrO7ARYoyz
