95 Exam Questions for JN0-663 Updated Versions With Test Engine
Pass JN0-663 Exam with Updated JN0-663 Exam Dumps PDF 2021
NEW QUESTION 50
Exhibit:
Referring to the exhibit, you want to reduce the CPU processing load on PE 2 by preventing the receipt of routes belonging to Customer B.
In this scenario, which Layer 3 VPN scaling mechanism provides this functionality?
- A. route reflection
- B. route target filtering
- C. route origin
- D. route refresh
Answer: B
NEW QUESTION 51
Exhibit:
Which two statements regarding the output shown in the exhibit are correct? (Choose two.)
- A. The PEs have matching control word values.
- B. The type of connection is remote.
- C. The label associated with this virtual circuit is out of range.
- D. The type of connection is local.
Answer: A,B
NEW QUESTION 52
Exhibit:
You are troubleshooting an issue where R1 is no longer receiving the default IS-IS route from R3.
Referring to the exhibit, which action would you take to solve the problem?
- A. Delete the protocols isis ignore-attached-bit configuration statement on R1.
- B. Delete the protocols isis level 2 disable configuration statement on R3.
- C. Delete the protocols isis ignore-attached-bit configuration statement on R3.
- D. Delete the protocols isis import configuration statement on R1.
Answer: A
NEW QUESTION 53
Exhibit:
Referring to the exhibit, you want to make ISP1 your preferred connection for inbound and outbound traffic.
Which two steps will accomplish this task? (Choose two.)
- A. Create an export policy to prepend the ASN on advertised routes and apply it to the EBGP peer on R2.
- B. Create an export policy setting local-preference 200 and next-hop self and apply it to the IBGP peers on R2.
- C. Create an export policy to prepend the ASN on advertised routes and apply it to the EBGP peer on R1.
- D. Create an export policy setting local-preference 200 and next-hop self and apply it to the IBGP peers on R1.
Answer: A,D
NEW QUESTION 54
Exhibit:
Referring to the exhibit, which path would traffic passing through R1 take to get.
- A. R1 -> R3 -> R5 -> R6
- B. R1 -> R3 -> R4 -> R6
- C. R1 -> R2 -> R4 -> R6
- D. R1 -> R2 -> R3 -> R6
Answer: B
NEW QUESTION 55
Exhibit:
A network administrator is concerned about the number of LSAs that they are observing on the network.
What will reduce Type 7 LSAs advertised from R2 to the non-backbone routers shown in the exhibit?
- A. Configure no-summaries under protocols ospf3 on R2.
- B. Configure no-summaries under area 0.0.0.2 on R2.
- C. Configure nssa under area 0.0.0.2 on R2.
- D. Configure no-naaa-abr under protocols ospf3 on R2.
Answer: D
NEW QUESTION 56
Exhibit:
The route shown in the exhibit is an example of which type of next-generation MVPN route?
- A. Type 1 Intra-AS inclusive MVPN membership discovery
- B. Type 2 Inter-AS inclusive MVPN membership discovery
- C. Type 4 Selective MVPN autodiscovery route for leaf
- D. Type 3 Selective MVPN autodiscovery route
Answer: A
NEW QUESTION 57
Exhibit.
A network designer wants to ensure that traffic from R2 destined for 2001 db9:ffff:ff00. '62 always traverses the R2-R1 link it that link is available Referring to the exhibit, which configuration change will satisfy this requirement?
A)
B)
C)
D)
- A. Option C
- B. Option B
- C. Option D
- D. Option A
Answer: A
NEW QUESTION 58
Exhibit:
R2 is receiving a route from R1 and you must ensure that the route is not advertised to R3.
Referring to the exhibit, which two configurations on R2 will solve the issue? (Choose two.)
- A. Apply the no-export policy as an import policy under group 65001
- B. Apply the no-advertise policy as an export policy under group 65003
- C. Apply the no-advertise policy as an import policy under group G5001
- D. Apply the no-export policy as an export policy under group 65003
Answer: B,C
NEW QUESTION 59
Exhibit:
R2 is receiving a route from R1 and you must ensure that the route is not advertised to R3.
Referring to the exhibit, which two configurations on R2 will solve the issue? (Choose two.)
- A. Apply the no-export policy as an import policy under group 65001
- B. Apply the no-advertise policy as an export policy under group 65003
- C. Apply the no-advertise policy as an import policy under group G5001
- D. Apply the no-export policy as an export policy under group 65003
Answer: B,C
NEW QUESTION 60
Exhibit:
Referring to the exhibit, which two statements are correct? (Choose two.)
- A. R1 will never forward transit traffic through R2.
- B. The OSPF interface metrics on R2 are all set to 65535.
- C. Transit traffic from R1 to R4 will traverse R3.
- D. R2 stops sending LSAs into the network.
Answer: B,C
NEW QUESTION 61
Which two statements about IS-IS are correct? (Choose two.)
- A. Level 2 routers can form adjacencies with either Level 1 or Level 2 routers.
- B. An IS-IS router sets the attached bit in the PDUs it sends to a Level 1 area to indicate that it is a backbone router.
- C. A Level 1 router can only form adjacencies with other Level 1 routers.
- D. Level 1 intermediate systems exchange routing information with Level 1 intermediate systems in other IS-IS areas.
Answer: A,C
NEW QUESTION 62
You have a mixed vendor EVPN environment and you need to ensure VXLAN interoperability between all devices.
In tins scenario, winch statement is correct?
- A. You should only use pure Type 5 routes.
- B. You should only use Type 6 and Type 2 routes.
- C. You should only use Type 2 and Type 5 routes.
- D. You should only use pure Type 2 routes.
Answer: C
NEW QUESTION 63
Exhibit:
Referring to the exhibit, you are asked to summarize all routes in the 10.10.0 0/22 address range ensuring that a single summary route is present in area 49.0002 while the IS-IS internal contributing routes are restricted to area 49.0001. All other routes must not be affected.
Which two operations would have to be performed on R2 to accomplish this task? (Choose two.)
- A. Create and apply a policy with a single term to accept only the summary route.
- B. Include the to level 2 match criteria when referencing the summary route.
- C. Create and apply a policy with two terms; one to accept the summary route and one to reject the contributing routes.
- D. Include the from level 1 match criteria when referencing the summary route.
Answer: B,C
NEW QUESTION 64
Which two statements about IS-IS are correct? (Choose two.)
- A. An IS-IS router sets the attached bit in the PDUs it sends to a Level 1 area to indicate that it is a backbone router.
- B. Level 2 routers can form adjacencies with either Level 1 or Level 2 routers.
- C. Level 1 intermediate systems exchange routing information with Level 1 intermediate systems on other IS-IS areas.
- D. A Level 1 router can only form adjacencies with other Level 1 routers.
Answer: A,D
NEW QUESTION 65
Which two statements are correct about Opaque LSAs in OSPF? (Choose two )
- A. Type 10 LSAs are used for MPLS traffic-engineering and have area scope.
- B. Type 11 LSAs are used for MPLS label exchange and have link-local scope
- C. Type 11 LSAs are used for MPLS traffic-engineering and have area scope
- D. Type 9 LSAs are used for graceful-restart and have link-local scope
Answer: B,D
NEW QUESTION 66
Exhibit:
R4 is directly connected to both RPs (R2 and R3). R4 is currently sending all joins upstream to R3 but you want to load balance the joins between both RPs Referring to the exhibit, which configuration change will solve this issue?
- A. Configure the bootstrap priority on R2 to be the same as R3.
- B. Configure the default route in inet.2 on R4 from R3 as the next hop to both R3 and R2.
- C. Configure the join-load-balance parameter under PIM on R4.
- D. Configure the group-range parameter to be the same on R2 and RCA
Answer: C
NEW QUESTION 67
Exhibit:
Referring to the exhibit, which two statements are true? (Choose two.)
- A. This router is an ABR
- B. There are two interfaces marked as passive.
- C. This router is an ASBR.
- D. There is one interface marked as passive.
Answer: B,C
NEW QUESTION 68
......
JN0-663 Exam Dumps - Free Demo & 365 Day Updates: https://www.verifieddumps.com/JN0-663-valid-exam-braindumps.html
Free Sales Ending Soon - Use Real JN0-663 PDF Questions: https://drive.google.com/open?id=1z3B5-SetHPA9MAzneJBBEJG3umrfIVT8
