• Home
  • Articles
  • [Apr-2024] Free PAS-C01 Exam Questions PAS-C01 Actual Free Exam Questions [Q12-Q31]

[Apr-2024] Free PAS-C01 Exam Questions PAS-C01 Actual Free Exam Questions [Q12-Q31]

Share

[Apr-2024] Free PAS-C01 Exam Questions PAS-C01 Actual Free Exam Questions

Verified PAS-C01 dumps and 142 unique questions


Amazon PAS-C01 certification exam is a highly sought-after credential in the IT industry, as it validates the skills and expertise of professionals who are experienced in deploying and managing SAP applications on AWS. Employers look for individuals who hold this certification as it indicates that they have the knowledge and expertise required to deploy, manage, and scale SAP applications on AWS, which is a highly valuable skill in today's cloud-based IT landscape.


The PAS-C01 exam is a multiple-choice exam that consists of 65 questions. Candidates will have 170 minutes to complete the exam. PAS-C01 exam is available in English, Japanese, Korean, and Simplified Chinese. The passing score for the exam is 750 out of 1000.

 

NEW QUESTION # 12
A company wants 10 run SAP HANA on AWS m the eu-centrai-1 Region. The company must make the SAP HANA system highly available by using SAP HANA system replication in addition the company must create a disaster recovery (DR) solution that uses SAP HANA system replication in the eu-west-1 Region As prerequisites the company has confirmed that inter-AZ latency is less than 1 ms and that Inter-Region latency is greater than 1 ms.
Which solutions will meet these requirements? (Select TWO.)

  • A. Install the tier 1 primary system and the tier 2 secondary system in eu-central-1 Configure the tier 1 system in Availability Zone 1 Configure the tier 2 system in Availability Zone 2 Configure SAP HANA system replication between tier 1 and tier 2 by using SYNC replication mode Install the OR tier 3 secondary system n eu-west-1 Store daily backups from tier 1 m an Amazon S3 bucket m eu-central-1 Use S3 Cross-Region Replication to copy the daily backups to eu-west-i where they can be restored if needed
  • B. Install the tier 1 primary system and the tier 2 secondary system in eu-central-1 Configure the tier 1 system in Availability Zone 1 Configure the tier 2 system m Availability Zone 2 Configure SAP HANA system replication between tier 1 and tier 2 by using SYNC replication mode Install the OR her 3 secondary system n eu-west-1 by using ASYNC replication mode.
  • C. Install the tier 1 primary system and the tier 2 secondary system in eu-central-1 Configure the tier 1 system m Availability Zone 1 Configure the tier 2 system m Availability Zone 2 Configure SAP HANA system replication between tier 1 and tier 2 by using ASYNC replication mode install the OR tier 3 secondary system m eu-west-1 by using SYNC replication mode.
  • D. Install the tier 1 primary system and the tier 2 secondary system in eu-central-1 Configure the tier 1 system m Availability Zone 1 Configure the tier 2 system m Availability Zone 2 Configure SAP HANA system replication between tier 1 and tier 2 by using SYNCMEM replication mode Install the DR tier 3 secondary system in eu-west-1 by using ASYNC replication mode
  • E. install the tier 1 primary system in eu-central-1 install the tier 2 secondary system and the DR tier 3 secondary system m eu-west-1 Configure the tier 2 system in Availability Zone 1 Configure the tier 3 system in Availability Zone 2 Configure SAP HANA system replication between all tiers by using ASYNC replication mode

Answer: A,C

Explanation:
Explanation
Ensures high availability and disaster recovery by using SAP HANA system replication in two different availability zones in eu-central-1, and then installing a third secondary system in eu-west-1 with SYNC replication mode, which provides a fallback option in case of disaster, also it meets the inter-AZ latency requirement.
Ensures high availability and disaster recovery by using SAP HANA system replication in two different availability zones in eu-central-1, and then storing daily backups from tier 1 in an Amazon S3 bucket in eu-central-1 and then using S3 cross-region replication to copy the backups to eu-west-1 where they can be restored if needed, this meets the inter-region latency requirement.


NEW QUESTION # 13
A company runs a three-system SAP S/4HANA landscape on Amazon EC2 instances. The landscape includes a development system, a QA system, and a production system. Each system runs on its own EC2 instance. The production instance hosts a critical system that must run 24 hours a day, 7 days a week. The development instance and the QA instance need to run only during business hours and can be stopped for the rest of the day.
An SAP administrator plans to use AWS Systems Manager to implement an automated start-stop solution for the development instance and the QA instance. When the SAP administrator attempts to deploy the solution, the SAP administrator cannot find any SAP S/4HANA systems in Systems Manager.
Which options are possible causes of this problem? (Choose two.)

  • A. The AWS Data Provider for SAP agent is not installed on the EC2 instances.
  • B. An appropriate instance profile that contains the AmazonSSMManagedInstanceCore policy is not assigned to the EC2 instances.
  • C. The EC2 instances are attached to a security group that has an outbound rule that does not explicitly allow port 443.
  • D. Amazon CloudWatch detailed monitoring is not turned on for the EC2 instances.
  • E. Systems Manager Agent (SSM Agent) is not installed on the EC2 instances.

Answer: B,E

Explanation:
https://docs.aws.amazon.com/ssm-sap/latest/userguide/troubleshooting.html


NEW QUESTION # 14
A company that has SAP workloads on premises plans to migrate an SAP environment to AWS. The company is new to AWS and has no poor setup. The company has the following requirements
- The application server and database server must be placed in isolated network configurations
* SAP systems must be accessible to the on-premises end users over the internet
* The cost of communications between the application server and the database server must be minimized Which combination of steps should an SAP solutions architect take to meet these requirements? (Select TWO.)

  • A. Configure a Network Load Balancer for incoming connections from end users
  • B. Set up an AWS Direct Connect connection with a private VIF between the company's on-premises network and AWS
  • C. Separate the application server and the database server by using different subnets and network security groups within the same VPC
  • D. Separate the application server and the database server by using different VPCs
  • E. Set up an AWS Site-to-Site VPN connection between the company's on-premises network and AWS

Answer: C,D


NEW QUESTION # 15
A company is using a multi-account strategy for SAP HANA and SAP BW 4HANA instances across development QA and production systems m the same AWS Region Each system is hosted m its own VPC The company needs to establish cross-VPC communication between the SAP systems.
The company might add more SAP systems m the future. The company must create connectivity across the SAP systems and hundreds of AWS accounts. The solution must maximize scalability and reliability.
Which solution will meet these requirements?

  • A. Set up VPC peering between the accounts Configure routing in each VPC to use the VPC peering links
  • B. Create a VPC link for each SAP system Use the VPC links to connect the SAP systems
  • C. Create an AWS Transit Gateway in a central networking account Attach the transit gateway to the AWS accounts Set up routing and a network ACL to establish communication
  • D. Create a transit VPC that uses the hub-and-spoke model set up routing to use the transit VPC for communication between the SAP systems

Answer: C


NEW QUESTION # 16
A company is running its SAP S/4HANA system on AWS. The company needs to retain database backups for the previous 30 days. The company is taking full online backups by using SAP HANA Studio and is storing the backup files on General Purpose SSD (gp3) Amazon Elastic Block Store (Amazon EBS) volumes. The company needs to reduce the cost of this storage.
What should the company do to achieve the LOWEST cost for the backup storage?

  • A. Continue to use SAP HANA Studio to back up the SAP HANA database. Use Throughput Optimized HDD (st1) EBS volumes to store each backup. After each backup is completed, use Linux shell scripts to move the backup to Amazon S3. Set up an S3 Lifecycle configuration to delete the backups that are older than 30 days.
  • B. Continue to use SAP HANA Studio to back up the SAP HANA database. Use AWS Backint Agent for SAP HANA to store each backup. Set up an Amazon S3 Lifecycle configuration to delete the backups that are older than 30 days.
  • C. Use AWS Backup to take full online backups of the SAP HANA database.
  • D. Continue to use SAP HANA Studio to back up the SAP HANA database to gp3 EBS volumes.
    After each backup is completed, use Linux shell scripts to move the backup to Amazon S3. Set up an S3 Lifecycle configuration to delete the backups that are older than 30 days.

Answer: B


NEW QUESTION # 17
A company wants to improve the RPO and RTO for its SAP disaster recovery (DR) solution by running the DR solution on AWS. The company is running SAP ERP Central Component (SAP ECC) on SAP HANA. The company has set an RPO of 15 minutes and an RTO of 4 hours.
The production SAP HANA database is running on a physical appliance that has x86 architecture.
The appliance has 1 TB of memory, and the SAP HANA global allocation limit is set to 768 GB.
The SAP application servers are running as VMs on VMware, and they store data on an NFS file system. The company does not want to change any existing SAP HANA parameters that are related to data and log backup for its on-premises systems.
What should an SAP solutions architect do to meet the DR objectives MOST cost-effectively?

  • A. For the SAP HANA database, change the log backup frequency to 5 minutes. Move the data and log backups to Amazon S3 by using the AWS CLI or AWS DataSync. Launch the SAP HANA database. For the SAP application servers, export the VMs as AMIs by using the VM Import/Export feature from AWS. For NFS file shares /sapmnt and /usr/sap/trans, establish real-time synchronization from DataSync to Amazon Elastic File System (Amazon EFS).
  • B. For the SAP HANA database, SAP application servers, and NFS file shares, use CloudEndure Disaster Recovery to replicate the data continuously from on premises to AWS. Use CloudEndure Disaster Recovery to launch target instances in the event of a disaster.
  • C. For the SAP HANA database, change the log backup frequency to 5 minutes. Move the data and log backups to Amazon S3 by using AWS Storage Gateway File Gateway. For the SAP application servers, export the VMs as AMIs by using the VM Import/Export feature from AWS. For NFS file shares /sapmnt and /usr/sap/trans, establish real-time synchronization from AWS DataSync to Amazon Elastic File System (Amazon EFS).
  • D. For the SAP HANA database, use a smaller SAP certified Amazon EC2 instance. Use SAP HANA system replication with ASYNC replication mode to replicate the data continuously from on premises to AWS. For the SAP application servers, use CloudEndure Disaster Recovery for continuous data replication. For NFS file shares /sapmnt and /usr/sap/trans, establish real-time synchronization from AWS DataSync to Amazon Elastic File System (Amazon EFS).

Answer: D


NEW QUESTION # 18
A company wants to migrate a native SAP HANA database to AWS. The database ingests large amounts of data every month, and the size of the database is growing rapidly.
The company needs to store data for 10 years to meet a regulatory requirement. The company uses data from the last 2 years frequently in several reports. This recent data is critical and must be accessed quickly. The data that is 3-6 years old is used a few times a year and can be accessed in a longer time frame. The data that is more than 6 years old is rarely used and also can be accessed in a longer time frame.
Which combination of steps will meet these requirements? (Choose three.)

  • A. Move the frequently accessed data from the last 2 years to SAP Information Life Cycle Management (ILM) with SAP IQ.
  • B. Move the less frequently accessed data that is 3-6 years old to a warm tier on Amazon Elastic File System (Amazon EFS) by using SAP HANA dynamic tiering.
  • C. Keep the frequently accessed data from the last 2 years in a hot tier on an SAP HANA certified Amazon EC2 instance.
  • D. Move the less frequently accessed data that is 3-6 years old to a warm tier on Amazon Elastic File System (Amazon EFS) by using data aging.
  • E. Move the rarely accessed data that is more than 6 years old to a cold tier on Amazon S3 by using SAP Data Hub.
  • F. Move the rarely accessed data that is more than 6 years old to a cold tier on SAP BW Near Line Storage (NLS) with Apache Hadoop.

Answer: B,C,E

Explanation:
https://docs.aws.amazon.com/sap/latest/sap-hana/sap-data-tiering.html


NEW QUESTION # 19
A company is hosting an SAP HANA database on AWS. The company is automating operational tasks including backup and system refreshes. The company wants to use SAP HANA Studio to perform data backup of an SAP HANA tenant database to a backint interface. The SAP HANA database is running in multi-tenant database container (MDO mode. The company receives the following error message during an attempt to perform the backup.

What should an SAP solutions architect do to resolve this issue?

  • A. Set the execute permission for AWS Backint agent binary aws-backint-agent and for the launcher script aws-backint-agent-launcher sh in the installation directory
  • B. Verify the installation steps Create symbolic links (symlinks)
  • C. Ensure that the cataiog_backup_using_backint SAP HANA parameter is set to true Ensure that the data_backup_parameter_file and log_backup_parameter_file parameters have the correct path location in the global ini file
  • D. Add the SAP HANA system to SAP HANA Studio Select multiple container mode and then try to initiate the backup again

Answer: C


NEW QUESTION # 20
A company that has SAP workloads on premises plans to migrate an SAP environment to AWS. The company is new to AWS and has no poor setup. The company has the following requirements
- The application server and database server must be placed in isolated network configurations
* SAP systems must be accessible to the on-premises end users over the internet
* The cost of communications between the application server and the database server must be minimized Which combination of steps should an SAP solutions architect take to meet these requirements? (Select TWO.)

  • A. Configure a Network Load Balancer for incoming connections from end users
  • B. Separate the application server and the database server by using different VPCs
  • C. Set up an AWS Direct Connect connection with a private VIF between the company's on-premises network and AWS
  • D. Separate the application server and the database server by using different subnets and network security groups within the same VPC
  • E. Set up an AWS Site-to-Site VPN connection between the company's on-premises network and AWS

Answer: B,C

Explanation:
Explanation
To meet the requirements, an SAP solutions architect should take the following steps:
* Separate the application server and the database server by using different VPCs. This will ensure that the application server and the database server are in isolated network configurations, and that the communication between them is minimized.
* Set up an AWS Direct Connect connection with a private VIF between the company's on-premises network and AWS. This will ensure that the SAP systems are accessible to the on-premises end users over the internet and minimize the cost of communications between the application server and the database server.
Using a Network Load Balancer for incoming connections from end users is not a necessary step, as it's not required to meet the requirements Setting up an AWS Site-to-Site VPN connection is not a necessary step, as it's not required to meet the requirements Separating the application server and the database server by using different subnets and network security groups within the same VPC is not a necessary step as it's not required to meet the requirements


NEW QUESTION # 21
A company uses an SAP application that runs batch jobs that ate performance sensitive. The batch jobs can be restarted safely The SAP application has sot application servers. The SAP application functions reliability as long as the SAP application availability remains greater than 60%. The company wants to migrate the SAP application to AWS. The company is using a duster with two Availability Zones How should the company distribute the SAP application servers to maintain system reliability?

  • A. Distribute the SAP application servers equally across three partition placement groups
  • B. Distribute the SAP application servers equally across two Availability Zones
  • C. Distribute the SAP application servers equally across three Availability Zones
  • D. Create an Amazon EC2 Auto Scaling group across two Availability Zones Set a minimum capacity value of 4.

Answer: C

Explanation:
Explanation
This will ensure that even in the event of a failure in one Availability Zone, the remaining two Availability Zones will still have sufficient capacity to meet the availability requirement of greater than 60%. This will also provide an additional layer of redundancy and protection against a single point of failure.


NEW QUESTION # 22
An SAP engineer has deployed an SAP S 4HANA system on an Amazon EC2 instance mat runs Linux. The SAP license key has been installed After a white the newly installed SAP instance presents an error that indicates that the SAP license key is not valid because the SAP system's hardware key changed. There have been no changes to the EC2 instance or its configuration.
Which solution will permanently resolve this issue?

  • A. Apply a new SAP license that uses a new hardware key Install the new key
  • B. Set the SUC_HW_VERSlON Linux environment variable
  • C. Reboot the EC2 instance
  • D. Perform SAP kernel patching

Answer: A

Explanation:
Explanation
When the hardware key changes, the license key becomes invalid and it requires to install new license key that uses the new hardware key.


NEW QUESTION # 23
A company is planning to retire a data center where a few legacy SAP applications run. The applications are SAP R/3 4.6C with a Microsoft SQL Server 2005 database end are running on Windows Server 2008. The applications are outside the extended maintenance period. There is no SAP support for the applications.
The company has no plans to upgrade the applications or move the applications to a different platform. The company does not have a policy to maintain installation media for any of the applications. The company wants to migrate the applications to AWS.
How can the company migrate the applications to AWS?

  • A. Use AWS Launch Wizard for SAP to launch the applications on AWS. Migrate the applications by using backup and restore.
  • B. Manually install the applications on AWS. Perform a database synchronization from the source to the target.
  • C. Use AWS Application Migration Service to migrate the applications.
  • D. Perform an SAP system copy from the source to the target by using SAP Software Provisioning Manager.

Answer: C

Explanation:
https://aws.amazon.com/blogs/awsforsap/automating-sap-migrations-using-cloudendure- migration/


NEW QUESTION # 24
A company wants to migrate its SAP landscape from on premises to AWS
What are the MINIMUM requirements that the company must meet to ensure full support of SAP on AWS? (Select THREE.)

  • A. Install configure and run the AWS Data Provider for SAP on each instance m the landscape
  • B. Deploy the infrastructure by using SAP Cloud Appliance Library
  • C. Deploy the SAP landscape on an AWS account that has either an AWS Business Support plan or an AWS Enterprise Support plan
  • D. Protect all production instances by using Amazon EC2 automatic recovery
  • E. Enable detailed monitoring for Amazon CloudWatch on each instance in the landscape
  • F. Deploy the infrastructure for the SAP landscape by using AWS Launch Wizard for SAP

Answer: A,B,C


NEW QUESTION # 25
A company is running its SAP applications on Oracle Database Oracle Database is hosted on physical servers that are running SUSE Linux Enterprise Server Because of compliance requirements the company cannot install any additional software on its on premises database servers. The company needs to migrate the SAP landscape to AWS and must continue to use Oracle Database.
Which migration solution should the company use to meet these requirements?

  • A. SAP Software Update Manager (SUM) Database Migration Option (DMO) with System Move
  • B. Oracle Database replication with Oracle Data Guard
  • C. AWS Application Migration Service (CloudEndure Migration)
  • D. AWS Server Migration Service (AWS SMS)

Answer: B

Explanation:
This option would allow the company to continue using Oracle Database while also meeting their compliance requirements, as they would not need to install any additional software on their on-premises servers. They can use Oracle Data Guard to replicate their existing Oracle Database to an instance running on AWS, providing a way to migrate their SAP landscape to AWS while still using the same database.


NEW QUESTION # 26
A company's basis administrator is planning to deploy SAP on AWS in Linux. The basis administrator must set up the proper storage to store SAP HANA data and log volumes.
Which storage options should the basis administrator choose to meet these requirements?
(Choose two.)

  • A. Amazon S3
  • B. Amazon Elastic Block Store (Amazon EBS) Throughput Optimized HDD (st1)
  • C. Amazon Elastic Block Store (Amazon EBS) General Purpose SSD (gp2, gp3)
  • D. Amazon Elastic Block Store (Amazon EBS) Provisioned OPS SSD (io1, io2)
  • E. Amazon Elastic File System (Amazon EFS)

Answer: C,D

Explanation:
https://docs.aws.amazon.com/sap/latest/sap-hana/hana-ops-storage-config.html


NEW QUESTION # 27
An SAP solutions architect is using AWS Systems Manager Distributor to install the AWS Data Provider for SAP on production SAP application servers and SAP HANA database servers. The SAP application servers and the SAP HANA database servers are running on Red Hat Enterprise Linux.
The SAP solutions architect chooses instances manually in Systems Manager Distributor and schedules installation. The installation fails with an access and authorization error related to Amazon CloudWatch and Amazon EC2 instances. There is no error related to AWS connectivity.
What should the SAP solutions architect do to resolve the error?

  • A. Wait until Systems Manager Agent is fully installed and ready to use on the EC2 instances. Use Systems Manager Patch Manager to perform the installation.
  • B. Create an IAM role. Attach the appropriate policy to the role. Attach the role to the appropriate EC2 instances.
  • C. Install the CloudWatch agent on the servers before installing the AWS Data Provider for SAP.
  • D. Download the AWS Data Provider for SAP installation package from AWS Marketplace. Use an operating system super user to install the agent manually or through a script.

Answer: B

Explanation:
https://docs.aws.amazon.com/sap/latest/general/data-provider-troubleshooting.html


NEW QUESTION # 28
A company is planning to migrate its on-premises SAP ERP Central Component (SAP ECC) system on SAP HANA to AWS Each month the system experiences two peaks in usage. The first peak is on the 21st day of the month when the company runs payroll. The second peak is on the last day of the month when the company processes and exports credit data Both peak workloads are of high importance and cannot be rescheduled The current SAP ECC system has six application servers an of a similar size. During normal operation outside of peak usage four application servers would suffice Which purchasing option will meet the company's requirements MOST cost-effectively on AWS?

  • A. Six Reserved Instances
  • B. Four Reserved Instances and two Spot Instances
  • C. Six On-Demand Instances
  • D. Four Reserved Instances and two On-Demand Instances

Answer: A


NEW QUESTION # 29
A global enterprise is running SAP ERP Central Component (SAP ECC) workloads on Oracle in an on-premises environment. The enterprise plans to migrate to SAP S 4HANA on AWS.
The enterprise recently acquired two other companies One of the acquired companies is running SAP ECC on Oracle as its ERP system The other acquired company is running an ERP system that is not from SAP The enterprise wants to consolidate the three ERP systems into one ERP system on SAP S 4HANA on AWS Not all the data from the acquired companies needs to be migrated to the final ERP system The enterprise needs to complete this migration with a solution that minimizes cost and maximizes operational efficiency.
Which solution will meet these requirements?

  • A. Use SAP Software Update Manager (SUM) Database Migration Option (DMO) with System Move to re-architect all the systems to SAP S/4HANA and to change the platform to AWS Consolidate all three SAP S-4HANA systems two a final SAP S/4HANA system Decommission the other systems
  • B. Perform a lift-and-shift migration of all the systems to AWS Migrate the ERP system that is not from SAP to SAP ECC Convert all three systems to SAP S/4HANA by using SAP Software Update Manager (SUM) Database Migration Option (DMO) Consolidate all three SAP S4HANA systems into a final SAP &4HANAsystem Decommission the other systems
  • C. Use SAP Software Update Manager (SUM) Database Migration Option (DMO) with System Move to re-architect the enterprise initial system to SAP S'4HANA and to change the platform to AWS Consolidate the two systems from the acquired companies with this SAP S 4HANA system by using the Selective Data Transition approach with SAP Data Management and Landscape Transformation (DMLT)
  • D. Perform a lift-and-shift migration of an the systems to AWS Migrate the enterprise's initial system to SAP HANA, and then perform a conversion to SAP S/4HANA Consolidate the two systems from the acquired companies with this SAP S4HANA system by using the Selective Data Transition approach with SAP Data Management and Landscape Transformation (DMLT)

Answer: B


NEW QUESTION # 30
A company is planning to migrate its on-premises SAP applications to AWS. The applications are based on Windows operating systems A file share stores the transport directories and third party application data on the network attached storage of the company's on-premises data center. The company's plan is to lift and shift the SAP applications and the file share to AWS. The company must follow AWS best practices for the migration Which AWS service should the company use to host the transport directories and third-party application data on AWS?

  • A. Amazon Elastic Block Store (Amazon EBS)
  • B. Amazon Elastic File System (Amazon EFS)
  • C. Amazon FSx for Windows File Server
  • D. AWS Storage Gateway

Answer: C

Explanation:
https://aws.amazon.com/blogs/awsforsap/how-to-setup-sap-netweaver-on-windows-mscs-for-sap-ascs-ers-on-aws-using-amazon-fsx/


NEW QUESTION # 31
......

Latest 100% Passing Guarantee - Brilliant PAS-C01 Exam Questions PDF: https://www.verifieddumps.com/PAS-C01-valid-exam-braindumps.html

PAS-C01 Dumps for Pass Guaranteed - Pass PAS-C01 Exam: https://drive.google.com/open?id=1SmhfDN2HrwvRTcC5GDCOJn-rcRoqkZXs

Related Articles

more
Amazon PAS-C01 Certification Practice Exam