[Aug 20, 2026] Genuine EDGE-Expert Exam Dumps Free Demo
Printable & Easy to Use GBCI EDGE EDGE-Expert Dumps 100% Same Q&A In Your Real Exam
NEW QUESTION # 35
Within the EDGE methodology, recycled water or rainwater harvested on site is deducted from the building's Improved Case water consumption and is reported as:
- A. Potable water
- B. Wastewater
- C. Water savings
- D. Water usage
Answer: C
Explanation:
The EDGE methodology quantifies the impact of water efficiency measures like rainwater harvesting and recycled water by comparing the Improved Case to the Base Case. The EDGE Methodology Report states:
"Recycled water or rainwater harvested on site reduces the building's potable water demand in the Improved Case. This reduction is deducted from the Improved Case water consumption and reported as water savings in the EDGE software, reflecting the volume of potable water no longer required due to the measure" (EDGE Methodology Report Version 2.0, Section 4.2: Water Savings Calculations). Option B, water savings, accurately reflects this reporting method, as the software highlights the reduction in potable water use as a saving. Option A (water usage) is incorrect, as this term refers to the total consumption, not the reduction:
"Water usage in EDGE refers to the total volume consumed, not the savings achieved" (EDGE User Guide, Glossary). Option C (wastewater) is unrelated, as it refers to water output, not savings: "Wastewater is water discharged from the building, not a savings metric" (EDGE User Guide, Glossary). Option D (potable water) is also incorrect, as the measure reduces potable water use, but the reported metric is the saving, not the potable water itself: "Potable water demand is an input, while savings are the output" (EDGE User Guide, Section 5.2: Water Efficiency Measures). Thus, the correct reporting is water savings (Option B).
Reference:EDGE Methodology Report Version 2.0, Section 4.2: Water Savings Calculations; EDGE User Guide Version 2.1, Section 5.2: Water Efficiency Measures, Glossary.
NEW QUESTION # 36
A project certificate that meets the EDGE Zero Carbon criteria fully on-site providing generation of on-site renewable electricity, will expire every
- A. two years.
- B. three years.
- C. four years.
- D. five years.
Answer: C
Explanation:
Under the CBCI EDGE curriculum, EDGE Certified and EDGE Advanced are one-time certifications and do not require renewal. EDGE Zero Carbon is treated differently because it depends on ongoing operational conditions, especially how the building's remaining operational emissions are addressed through renewable electricity and, where applicable, offsets. For this reason, EDGE Zero Carbon certificates include an expiration date and require renewal to confirm that the carbon strategy remains valid over time.
The EDGE Zero Carbon rules specify different expiration periods depending on how the project achieves the renewable electricity and emissions balance. When a project meets the EDGE Zero Carbon criteria fully on- site, including the generation of on-site renewable electricity, the certificate expires after four years. This longer validity period reflects the higher confidence and stability associated with on-site renewable generation that is physically tied to the building and less dependent on external contracts or market instruments.
By comparison, projects that rely on purchased off-site renewable electricity and or carbon offsets have a shorter certificate validity period because procurement terms and availability can change. Therefore, for a fully on-site renewable electricity EDGE Zero Carbon project, the correct expiration period is four years.
NEW QUESTION # 37
Which of the following types of light bulbs will have the highest efficacy of lumens per watt?
- A. Light emitting diodes LEDs
- B. T8 fluorescent lamps
- C. T5 fluorescent lamps
- D. Compact fluorescent lamps CFLs
Answer: A
Explanation:
In the CBCI EDGE curriculum, lighting efficiency is a critical strategy for reducing internal loads and lowering overall building energy consumption. Lighting efficacy is measured in lumens per watt, indicating how much visible light is produced for each unit of electrical power consumed. Among the listed options, light emitting diodes, or LEDs, provide the highest efficacy.
Typical performance ranges show that T8 and T5 fluorescent lamps are more efficient than older lighting technologies but generally deliver lower lumens per watt compared to modern LED systems. Compact fluorescent lamps are also more efficient than incandescent lighting but still fall short of the efficacy achieved by LEDs. Contemporary LED fixtures can exceed 100 lumens per watt and in many cases reach significantly higher values depending on product quality and design.
The EDGE software rewards high-efficiency lighting systems because reducing lighting power density directly lowers cooling loads in air-conditioned spaces and decreases total delivered energy consumption.
LEDs also offer additional advantages such as longer lifespan and lower maintenance requirements, further supporting sustainable building design objectives. Therefore, among the listed options, LEDs have the highest efficacy and are the correct answer.
NEW QUESTION # 38
How many measures need to be selected in order to meet the EDGE Energy Standard?
- A. 5 measures
- B. 20 measures
- C. 20% of the measures listed
- D. At least all required measures
Answer: D
Explanation:
In the EDGE system, compliance with the Energy Standard is not achieved by selecting a fixed number or a fixed percentage of measures. Instead, the project must demonstrate that the selected package of energy measures, when modeled in the EDGE software, achieves the minimum required energy savings compared to the local baseline. Because projects differ by climate, building type, geometry, and system choices, the number of measures needed can vary widely. One project might reach the target with a few high-impact measures, while another may need many smaller improvements.
At the same time, the curriculum explains that some measures are marked as required. These are mandatory prerequisites within the EDGE methodology and must be implemented where applicable. A project cannot claim compliance while omitting required measures. Therefore, while you may choose any combination of optional measures to reach the energy savings threshold, you must still implement all required measures as part of meeting EDGE requirements.
Options A, B, and C incorrectly imply a universal count-based rule. The only correct statement is that the project must implement at least all required measures, and then add any additional measures necessary to achieve the minimum energy savings target.
NEW QUESTION # 39
Other than embodied carbon, the selection of wall materials has an impact on
- A. solar heat gain coefficient.
- B. Window to Wall Ratio WWR.
- C. energy consumption.
- D. internal heat gains.
Answer: C
Explanation:
Within the CBCI EDGE curriculum, wall material selection affects not only embodied carbon under the materials category but also operational energy performance. The thermal properties of wall assemblies, including U-value, thermal mass, conductivity, and insulation levels, directly influence the building's heat transfer characteristics. These factors determine how much heat enters or escapes through the building envelope, thereby affecting cooling and heating loads.
When wall materials provide improved insulation or higher thermal mass, they reduce unwanted heat gains in hot climates and heat losses in cooler climates. This results in lower energy demand for HVAC systems. In the EDGE software, envelope performance improvements are reflected in the energy calculations under the improved case scenario, contributing to overall percentage energy savings.
Window to Wall Ratio is a geometric design parameter and is not determined by wall material choice. Internal heat gains are primarily influenced by occupants, lighting, and equipment rather than wall composition. Solar Heat Gain Coefficient refers specifically to glazing performance, not opaque wall materials. Therefore, aside from embodied carbon impacts, wall material selection most directly affects the building's energy consumption.
NEW QUESTION # 40
Which of the following measures require testing by the EDGE Auditor at the site audit?
- A. WEM16 - Condensate Water Recovery
- B. EEM07 - Green Roof
- C. WEM03 - Low-flow Faucets for Bathrooms
- D. WEM15 - Waste Water Treatment and Recycling System
Answer: C
Explanation:
According to the CBCI EDGE certification procedures, certain measures require physical verification and performance testing during the site audit to confirm that installed systems match the design-stage commitments entered in the EDGE software. Low-flow faucets for bathrooms fall into this category because their compliance depends on measurable flow rates. During the audit, the EDGE Auditor may use flow- measuring devices to test fixture discharge rates and verify that they meet the specified liters per minute used in the improved case calculations. This ensures that projected water savings are genuinely achieved in practice.
In contrast, measures such as a green roof are typically verified visually and through documentation such as drawings and material specifications rather than performance testing. Condensate water recovery and wastewater treatment systems are usually confirmed through installed system inspection, capacity checks, and documentation review, but not necessarily through direct flow-rate testing at each fixture point like low-flow faucets. The curriculum emphasizes that fixtures with defined performance parameters, such as flow rates, are subject to on-site testing to maintain the integrity and credibility of EDGE water savings claims.
NEW QUESTION # 41
Utility cost savings are calculated based on reduction in total:
- A. Electricity and water consumption.
- B. Energy and water consumption from the supply grid.
- C. Building energy and water consumption.
- D. Generator fuel and water consumption.
Answer: B
Explanation:
Utility cost savings in EDGE are calculated based on reductions in resource consumption sourced from the supply grid, as these are the costs directly borne by the building owner. The EDGE User Guide explains:
"Utility cost savings in EDGE are calculated based on the reduction in energy and water consumption from the supply grid, using local tariffs for electricity and water to convert resource savings into financial savings" (EDGE User Guide, Section 2.4: Interpreting EDGE Results). Option D, energy and water consumption from the supply grid, aligns with this definition, focusing on grid-supplied resources. Option A (electricity and water consumption) is partially correct but lacks specificity about the source: "Electricity and water must be grid-supplied to be included in utility cost savings; onsite generation is excluded" (EDGE Methodology Report Version 2.0, Section 4.4: Cost Savings Calculations). Option B (generator fuel and water consumption) is incorrect, as generator fuel is not part of utility cost savings: "Generator fuel costs are not included in utility savings, as EDGE focuses on grid-supplied utilities" (EDGE User Guide, Section 2.4:
Interpreting EDGE Results). Option C (building energy and water consumption) is too broad, including onsite sources: "Building consumption includes all sources, but utility savings are grid-specific" (EDGE Methodology Report Version 2.0, Section 4.4: Cost Savings Calculations). Thus, energy and water from the supply grid (Option D) is the correct basis for utility cost savings.
Reference: EDGE User Guide Version 2.1, Section 2.4: Interpreting EDGE Results; EDGE Methodology Report Version 2.0, Section 4.4: Cost Savings Calculations.
NEW QUESTION # 42
An EDGE Auditor has received initial documentation from a Client which implies that measures not selected on the downloaded PDF can be claimed. What should the Auditor do?
- A. As submission documents are correct, the Auditor should ignore the error on PDF.
- B. The Auditor should ask for advice from the EDGE Partner and then take action.
- C. Inform the Client to update the EDGE software and prepare a new PDF.
- D. The Auditor should modify the self-assessment and submit the project for certification.
Answer: C
Explanation:
The EDGE audit process requires that the documentation submitted by the Client accurately reflects the self- assessment in the EDGE software, ensuring consistency and transparency. The EDGE Expert and Auditor Protocols address discrepancies in documentation: "If an EDGE Auditor identifies a discrepancy between the submitted documentation and the self-assessment PDF, such as measures being claimed that were not selected in the EDGE software, the Auditor must inform the Client to update the EDGE software to reflect the correct measures and prepare a new PDF for submission. This ensures that the audit is based on an accurate representation of the project's claims" (EDGE Expert and Auditor Protocols, Section 4.2: Evidence Verification). Option C, inform the Client to update the EDGE software and prepare a new PDF, directly aligns with this protocol, as it corrects the error at the source and ensures the self-assessment matches the claimed measures. Option A (ask for advice from the EDGE Partner) is unnecessary, as the protocol provides clear guidance: "Auditors are expected to follow standard procedures for discrepancies without needing to consult the EDGE Partner, unless the issue involves a policy interpretation beyond the protocols" (EDGE Expert and Auditor Protocols, Section 4.1: Audit Process). Option B (modify the self-assessment and submit) is unethical and prohibited, as Auditors cannot alter the Client's submission: "The Auditor must not modify the Client's self-assessment in the EDGE software, as this compromises the independence of the audit process; the Client is responsible for updating the assessment" (EDGE Certification Protocol, Section 3.2:
Audit Requirements). Option D (ignore the error on PDF) is also incorrect, as ignoring discrepancies violates audit integrity: "All discrepancies between the PDF and submitted documents must be resolved before the audit proceeds, as ignoring errors could lead to incorrect certification outcomes" (EDGE Expert and Auditor Protocols, Section 4.2: Evidence Verification). The EDGE User Guide further reinforces: "The self- assessment PDF must accurately reflect the measures selected in the EDGE software, and any mismatch requires the Client to revise the assessment to ensure a fair and transparent audit" (EDGE User Guide, Section
6.2: Documentation Requirements). Thus, the Auditor should inform the Client to update the software and prepare a new PDF (Option C).
Reference:EDGE Expert and Auditor Protocols, Section 4.2: Evidence Verification, Section 4.1: Audit Process; EDGE Certification Protocol, Section 3.2: Audit Requirements; EDGE User Guide Version 2.1, Section 6.2: Documentation Requirements.
NEW QUESTION # 43
Which of the following hot water technologies is from a renewable source?
- A. High efficiency boiler for water heating
- B. Preheating water using waste heat from the generator
- C. Solar hot water collectors
- D. Ground source heat pump
Answer: C
Explanation:
EDGE recognizes renewable energy sources for their contribution to reducing carbon emissions in hot water production. The EDGE User Guide defines renewable hot water technologies: "Solar hot water collectors are considered a renewable source in EDGE, as they directly use solar energy to heat water, reducing reliance on fossil fuel-based energy" (EDGE User Guide, Section 4.2: Energy Efficiency Measures). Option B, solar hot water collectors, matches this description as it harnesses solar energy, a renewable resource. Option A (ground source heat pump) uses electricity to transfer heat from the ground, which is efficient but not renewable unless the electricity is from a renewable source: "Ground source heat pumps are efficient but rely on electrical input, not classified as a renewable source in EDGE" (EDGE Methodology Report Version 2.0, Section 5.1: Energy Efficiency Metrics). Option C (high efficiency boiler) typically uses gas or electricity, not a renewable source: "Boilers, even high-efficiency ones, are not renewable as they burn fuel or use grid electricity" (EDGE User Guide, Section 4.2: Energy Efficiency Measures). Option D (preheating water using waste heat from the generator) is a heat recovery method, not a renewable source: "Waste heat recovery improves efficiency but is not considered a renewable energy source in EDGE" (EDGE Methodology Report Version 2.0, Section 5.3: Energy Measures). Thus, solar hot water collectors (Option B) is the renewable source technology.
Reference:EDGE User Guide Version 2.1, Section 4.2: Energy Efficiency Measures; EDGE Methodology Report Version 2.0, Section 5.1: Energy Efficiency Metrics, Section 5.3: Energy Measures.
NEW QUESTION # 44
Water consumption savings, resulting from greywater recovery, are based on which of the following?
- A. Incremental cost of installation and cost of water consumption at local tariff
- B. Cost of water consumption at local tariff
- C. Improved case water consumption
- D. Base case water consumption
Answer: D
Explanation:
Greywater recovery in EDGE is a water efficiency measure, and the software calculates savings by comparing water consumption before and after implementing the measure. The EDGE Methodology Report explains the calculation method: "Water consumption savings from greywater recovery are calculated as the difference between the Base Case water consumption and the Improved Case water consumption after applying the measure. The Base Case represents the typical water use without any efficiency measures, serving as the benchmark for all savings calculations" (EDGE Methodology Report Version 2.0, Section 4.2: Water Savings Calculations). Option A, Base Case water consumption, is the correct reference point for determining savings, as it establishes the baseline against which the greywater recovery measure is evaluated. Option B (Improved Case water consumption) is the result after applying the measure, not the basis for savings. Option C (cost of water consumption at local tariff) and Option D (incremental cost of installation and cost of water consumption at local tariff) relate to financial outputs, not the direct calculation of water savings, as clarified:
"Water savings in EDGE are quantified in volume (liters or cubic meters), not cost, though cost savings are derived later using local tariffs" (EDGE User Guide, Section 5.2: Water Efficiency Measures). Thus, greywater recovery savings are based on Base Case water consumption (Option A).
Reference:EDGE Methodology Report Version 2.0, Section 4.2: Water Savings Calculations; EDGE User Guide Version 2.1, Section 5.2: Water Efficiency Measures.
NEW QUESTION # 45
Which of the following user types has access to the Share Subproject function?
- A. Auditor
- B. Certifier
- C. Reviewer
- D. Owner
Answer: D
Explanation:
In the CBCI EDGE curriculum, the Share Subproject function is treated as a project administration permission, because it controls who can access a project or part of a project and what they are allowed to do inside the EDGE platform. Sharing affects project confidentiality, accountability for inputs, and control of documentation, so it is restricted to the user role that holds administrative authority over the project workspace.
The Owner role is the primary controlling role in an EDGE project. The Owner can manage access, invite or remove team members, and assign appropriate permissions for collaboration. This is consistent with how EDGE separates responsibilities: the client side controls project data entry, collaboration, and submissions, while verification roles remain independent.
Auditors and Certifiers are part of the independent third-party assessment pathway. Their access is typically granted for review and verification purposes, not for administering who the project is shared with. A Reviewer role, where used, is also generally a read-only or limited-access role and does not have authority to share or manage subprojects.
Therefor
NEW QUESTION # 46
The Client has sent a copy of the local occupancy permit for a project being audited. This permit:
- A. Does not replace the need for desktop studies.
- B. Replaces the need to audit EDGE Materials measures.
- C. Does not replace the need to audit all EDGE measures.
- D. Replaces the need to audit all EDGE measures.
Answer: C
Explanation:
An occupancy permit indicates that a building meets local regulatory requirements for occupancy,but it does not address the specific green building measures required for EDGE certification. The EDGE Certification Protocol clearly outlines the role of such permits in the audit process: "A local occupancy permit provided by the Client confirms that the building complies with local building codes and is ready for use. However, it does not replace the need to audit all EDGE measures, as EDGE certification requires verification of specific energy, water, and materials efficiency measures that are not typically covered by local permits" (EDGE Certification Protocol, Section 3.4: Post-Construction Requirements). Option A, does not replace the need to audit all EDGE measures, directly aligns with this guidance, as the Auditor must still verify each claimed measure (e.g., insulation, low-flow fixtures, fly ash concrete) against EDGE standards. Option B (replaces the need to audit all EDGE measures) is incorrect, as the permit does not address EDGE-specific requirements:
"Local permits do not verify EDGE measures like energy savings or embodied energy reductions, so a full audit is still required" (EDGE Expert and Auditor Protocols, Section 4.4: Site Audit Procedures). Option C (does not replace the need for desktop studies) is partially correct but less comprehensive, as desktop studies are only one part of the audit process: "Desktop studies are part of the audit, but the occupancy permit does not exempt any aspect of the EDGE audit, including site visits and measure verification" (EDGE Certification Protocol, Section 3.2: Audit Requirements). Option D (replaces the need to audit EDGE Materials measures) is also incorrect, as materials measures (e.g., use of fly ash concrete) require specific evidence like manufacturer's data sheets, not covered by an occupancy permit: "Materials measures require detailed documentation of embodied energy reductions, which local permits do not address" (EDGE User Guide, Section 7.2: Materials Efficiency Measures). The EDGE User Guide further reinforces: "The Auditor must verify all EDGE measures through appropriate documentation and site visits, regardless of local permits, to ensure compliance with the EDGE standard" (EDGE User Guide, Section 6.3: Post-Construction Certification). Thus, the occupancy permit does not replace the need to audit all EDGE measures (Option A).
Reference:EDGE Certification Protocol, Section 3.4: Post-Construction Requirements, Section 3.2: Audit Requirements; EDGE Expert and Auditor Protocols, Section 4.4: Site Audit Procedures; EDGE User Guide Version 2.1, Section 6.3: Post-Construction Certification, Section 7.2: Materials Efficiency Measures.
NEW QUESTION # 47
How often should the EDGE Advanced certification be renewed?
- A. Renewal is done every two years.
- B. First renewal is done after two years and subsequently every four years.
- C. Renewal is not required.
- D. First renewal is done after four years and subsequently every two years.
Answer: C
Explanation:
According to the CBCI EDGE certification framework, EDGE Advanced certification, like EDGE Certified, does not require periodic renewal once it has been awarded. EDGE is a design and construction stage certification system that verifies compliance with energy, water, and materials efficiency targets at the time of certification. After successful design and site audits confirm that the committed measures have been implemented, the certificate is issued without an expiration date requiring routine renewal.
The system differs from operational performance rating tools that require re-certification based on ongoing performance data. EDGE focuses on the verified as-built performance compared to the baseline case at the time of project completion. Once the project achieves the required minimum 40 percent energy savings for EDGE Advanced, along with the standard 20 percent savings in water and materials, the certification remains valid without mandatory future audits.
Options suggesting renewal every two years or periodic cycles are not aligned with the EDGE framework.
Therefore, renewal is not required for EDGE Advanced certification, making option B the correct answer.
NEW QUESTION # 48
In the EDGE certification system, who is responsible for the entire project including providing project documentation, access to the site, and the payment of audit and certification fees?
- A. EDGE Auditor
- B. Project Owner
- C. EDGE Certification Provider
- D. EDGE Expert
Answer: B
Explanation:
The EDGE certification process assigns clear responsibilities to various stakeholders to ensure a smooth and accountable process. The EDGE Certification Protocol defines the role of the ProjectOwner (also referred to as the EDGE Client): "The Project Owner, as the EDGE Client, is responsible for the entire project within the EDGE certification system. This includes providing all necessary project documentation (e.g., drawings, specifications, and self-assessments), ensuring access to the site for audits, and paying the audit and certification fees as required by the Certification Provider" (EDGE Certification Protocol, Section 2.1: Roles and Responsibilities). Option C, Project Owner, directly aligns with this comprehensive responsibility. Option A (EDGE Expert) is incorrect, as the Expert's role is advisory: "The EDGE Expert provides consultancy services, assisting with documentation and measure selection, but the ultimate responsibility for submission and payment lies with the Project Owner" (EDGE Expert and Auditor Protocols, Section 2.1: Roles of EDGE Expert). Option B (EDGE Auditor) is also incorrect, as the Auditor's role is to verify compliance, not manage the project: "The EDGE Auditor conducts independent audits and is not responsible for project management, documentation provision, or fee payments" (EDGE Expert and Auditor Protocols, Section 2.2: Roles of EDGE Auditor). Option D (EDGE Certification Provider) is responsible for issuing certificates and overseeing the process, not managing the project: "The EDGE Certification Provider, such as GBCI, reviews the Auditor's recommendation and issues certificates, but does not manage the project or pay fees" (EDGE Certification Protocol, Section 3.3: Certification Decision). The EDGE User Guide further reinforces this:
"The Project Owner must coordinate all aspects of the certification process, ensuring documentation is complete, site access is granted for post-construction audits, and all fees are paid to the Certification Provider in a timely manner" (EDGE User Guide, Section 6.1: Project Preparation). This holistic responsibility makes the Project Owner (Option C) the correct answer.
Reference:EDGE Certification Protocol, Section 2.1: Roles and Responsibilities, Section 3.3: Certification Decision; EDGE Expert and Auditor Protocols, Section 2.1: Roles of EDGE Expert, Section 2.2: Roles of EDGE Auditor; EDGE User Guide Version 2.1, Section 6.1: Project Preparation.
NEW QUESTION # 49
Which of the following is an EDGE measure to reduce the embodied energy in materials?
- A. Occupancy sensors
- B. Fly ash concrete
- C. External shading
- D. Low-flow shower heads
Answer: B
Explanation:
Embodied energy in materials is one of the three core pillars of the EDGE standard, focusing on reducing the environmental impact of construction materials. The EDGE User Guide lists measures that specifically target embodied energy: "To reduce embodied energy in materials, EDGE includes measures such as the use of fly ash concrete, which substitutes a portion of cement with fly ash, a byproduct of coal combustion, thereby lowering the embodied energy and carbon footprint of concrete production" (EDGE User Guide, Section 7.2:
Materials Efficiency Measures). Option B, fly ash concrete, directly aligns with this measure, as it reduces the need for high-energy cement production. Option A (external shading) impacts energy by reducing cooling loads but does not directly address embodied energy: "External shading reduces operational energy use but does not contribute to embodied energy savings unless the shading materials themselves are low-impact, which is not specified in EDGE" (EDGE User Guide, Section 3.5: Passive Design Strategies). Option C (occupancy sensors) is an energy efficiency measure for lighting, not materials: "Occupancy sensors reduce lighting energy use but have no direct impact on embodied energy in materials" (EDGE User Guide, Section
4.4: Lighting Efficiency Measures). Option D (low-flow shower heads) targets water efficiency, not materials:
"Low-flow shower heads reduce water consumption, but their embodied energy impact is minimal and not a focus of EDGE materials measures" (EDGE User Guide, Section 5.2: Water Efficiency Measures). The EDGE MethodologyReport further elaborates: "Fly ash concrete can reduce embodied energy by up to 20% compared to traditional concrete, making it a key measure in EDGE for materials efficiency, especially in high-volume applications like hospitals or hotels" (EDGE Methodology Report Version 2.0, Section 6.1:
Embodied Energy in Materials). Other materials measures in EDGE, such as using recycled steel or bamboo, are not listed among the options, making fly ash concrete (Option B) the correct choice for reducing embodied energy.
Reference:EDGE User Guide Version 2.1, Section 7.2: Materials Efficiency Measures, Section 3.5: Passive Design Strategies, Section 4.4: Lighting Efficiency Measures, Section 5.2: Water Efficiency Measures; EDGE Methodology Report Version 2.0, Section 6.1: Embodied Energy in Materials.
NEW QUESTION # 50
During a design audit, an EDGE Auditor notices that the project does not meet the EDGE standard for energy.
Which of the following is an acceptable course of action for the Auditor?
- A. Contact the design team directly to work with them to find a solution to improve the energy efficiency performance of the project.
- B. Ask the Client to use the EDGE tool again to identify options that will take the project comfortably over the EDGE standard.
- C. As the project does not qualify for EDGE certification, the EDGE Auditor does not have to take any further action on the project.
- D. Based on the Auditor's previous experience on working on similar projects, provide a list of measures that the Client could incorporate in the project that will take them comfortably over the EDGE standard.
Answer: B
Explanation:
The role of an EDGE Auditor during a design audit (Preliminary Certification stage) is to verify compliance with the EDGE standard, which requires at least 20% savings in energy, water, and embodied energy in materials. If the project does not meet the standard, the Auditor must follow specific protocols without overstepping their role. The EDGE Expert and Auditor Protocols outline the acceptable actions: "If a project does not meet the EDGE standard for energy during a design audit, the Auditor should inform the Client of the shortfall and ask them to use the EDGE tool again to identify additional measures that will take the project comfortably over the EDGE standard (e.g., 20% energy savings). The Auditor must not provide design advice or modify the assessment themselves, as their role is to verify, not consult" (EDGE Expert and Auditor Protocols, Section 4.1: Audit Process). Option A, ask the Client to use the EDGE tool again to identify options that will take the project comfortably over the EDGE standard, directly aligns with this guidance, as it keeps the Auditor in a verification role while encouraging the Client to revise their design. Option B (contact the design team directly to work with them) is incorrect, as it violates the Auditor's independence: "The Auditor must not engage directly with the design team to improve the project, as this constitutes consultancy, which conflicts with their role as an independent verifier" (EDGE Expert and Auditor Protocols, Section 2.3:
Conflict of Interest). Option C (take no further action) is also incorrect, as the Auditor has a responsibility to report the shortfall: "If a project does not meet the EDGE standard, the Auditor must document the failure in the audit report and inform the Client, rather than abandoning the process" (EDGE Certification Protocol, Section 3.2: Audit Requirements). Option D (provide a list of measures based on the Auditor's experience) oversteps the Auditor's role by offering consultancy: "The Auditor cannot provide specific design recommendations or measures, as this compromises their impartiality; they must direct the Client to use the EDGE software or consult an EDGE Expert" (EDGE Expert and Auditor Protocols, Section 2.3: Conflict of Interest). The EDGE User Guide further supports: "During a design audit, the Auditor's role is to assess compliance, not to guide the design process; if the project falls short, the Client should revisit the EDGE tool to explore additional measures, potentially with the help of an EDGE Expert" (EDGE User Guide, Section
6.5: Working with EDGE Auditors). The EDGE Certification Protocol adds: "The Auditor's report should note the energy shortfall and recommend that the Client revise the self-assessment to meet the 20% savings threshold, ensuring the process remains Client-driven" (EDGE Certification Protocol, Section 3.2: Audit Requirements). Thus, asking the Client to use the EDGE tool again (Option A) is the acceptable course of action.
Reference:EDGE Expert and Auditor Protocols, Section 4.1: Audit Process, Section 2.3: Conflict of Interest; EDGE Certification Protocol, Section 3.2: Audit Requirements; EDGE User Guide Version 2.1, Section 6.5:
Working with EDGE Auditors.
NEW QUESTION # 51
Which of the following protocols should be followed when the project city is not listed in the EDGE App?
- A. Write to EDGE Certifier to request the city to be included and wait for the application to be updated.
- B. Choose the closest city to the project location and edit the climate data if necessary.
- C. Select any city in the same climate zone around the world and use that to certify the project.
- D. Choose the capital city to the project location and edit the climate data if necessary.
Answer: B
Explanation:
The EDGE App relies on location-specific climate data to calculate resource savings, but not all cities are listed. The EDGE User Guide provides guidance for such cases: "If the project city is not listed in the EDGE App, the user should choose the closest city to the project location that is available in the database. If necessary, the user can edit the climate data (e.g., temperature, humidity) to better reflect the project's actual conditions, ensuring accurate calculations" (EDGE User Guide, Section 2.2: Project Setup). Option B, choose the closest city and edit the climate data if necessary, directly matches this protocol. Option A (write to EDGE Certifier and wait) is incorrect, as this is not a required step: "Users are not required to request new cities; they can proceed by selecting the closest city" (EDGE User Guide, Section 2.2: Project Setup). Option C(select any city in the same climate zone globally) is too broad and inaccurate: "Choosing a city from a different region, even in the same climate zone, may lead to incorrect assumptions about local practices and climate" (EDGE Methodology Report Version 2.0, Section 3.2: Climate Data Inputs). Option D (choose the capital city) is also incorrect unless it is the closest: "The capital city should only be selected if it is the nearest available option in the database" (EDGE User Guide, Section 2.2: Project Setup). Thus, the correct protocol is to choose the closest city and edit climate data (Option B).
Reference:EDGE User Guide Version 2.1, Section 2.2: Project Setup; EDGE Methodology Report Version
2.0, Section 3.2: Climate Data Inputs.
NEW QUESTION # 52
......
EDGE-Expert Practice Test Give You First Time Success with 100% Money Back Guarantee!: https://www.verifieddumps.com/EDGE-Expert-valid-exam-braindumps.html
All Obstacles During EDGE-Expert Exam Preparation with EDGE-Expert Real Test Questions: https://drive.google.com/open?id=1qTqSyJQZ_yPTxn7FYUieITnlwHLJEv0z
