Latest [Mar 25, 2022] 300-630 Exam Dumps - Valid and Updated Dumps
Free Sales Ending Soon - 100% Valid 300-630 Exam Dumps with 78 Questions
Preparation Process
Career Prospects
The individuals who achieve the passing score in the Cisco 300-630 exam fulfill part of the requirements for getting the CCNP Data Center certification (they have to nail the 350-601 DCCOR test as well). With this certificate, the specialists can explore a wide range of job roles, such as a Data Center Engineer, a Senior Network Engineer, a Data Center Technician, a Technical Consulting Engineer, a Data Center Support, and a Network Analyst. The average salary outlook for the certified professionals is $79,000 per annum. Some senior-level applicants can earn $111,000 per year.
NEW QUESTION 19
Refer to the exhibit.
The 0.0.0.0/0 is configured as a default static route on L3Out-1. Which action should be taken for the 0.0.0.0/0 prefix to advertise out on L3Out-2 OSPF?
- A. Enable Shared Route Control Subnet
- B. Enable Shared Security Import Subnet
- C. Enable Export Route Control Subnet
- D. Enable Aggregate Export Subnet
Answer: D
NEW QUESTION 20
A leaf receives unicast traffic that is destined to an unknown source, and spine proxy is enabled in the corresponding bridge domain. Drag and drop the Cisco ACI forwarding operations from the left into the order the operation occurs on the right.
Answer:
Explanation:
NEW QUESTION 21 
Refer to the exhibit. Drag and drop the subnets and flags from the left into the External Network Instance Profile policies on the right to create a setup that advertises only 10.10.0.0/24 and 10.10.1.0/24 prefixes in VRF1 and establishes connectivity between VRFs. Not all options are used.
Answer:
Explanation:
NEW QUESTION 22
Which approach does Cisco ACI use to achieve multidestination packet forwarding between leaf switches in the same fabric?
- A. Map VXLAN to PIM-SM protocol
- B. Map VXLAN to PIM-DM protocol
- C. Map VXLAN VTEP to the multicast group
- D. Map VXLAN VNI to the multicast group
Answer: D
NEW QUESTION 23
Which action reduces the impact on workload when migrating from the existing Cisco NX-OS VXLAN network infrastructure to the Cisco ACI fabric?
- A. Use ACI spines for the Cisco ACI and VXLAN fabrics
- B. Disable bridge domain unicast routing while a default gateway is in VXLAN infrastructure
- C. Configure vPC between the standalone Nexus and the Cisco ACI leaf
- D. Set the default gateway in the Cisco ACI and VXLAN fabrics
Answer: D
NEW QUESTION 24
Which two actions are the Cisco best practices to configure NIC teaming load balancing for Cisco UCS B- Series blades that are connected to the Cisco ACI leaf switches? (Choose two.)
- A. Enable LACP active mode
- B. Create vPC
- C. Create vPC+
- D. Create PAgP
- E. Enable MAC pinning
Answer: A,E
NEW QUESTION 25
Refer to the exhibit.
A customer experiences resource overconsumption on one of its border leaf switches. Which action should be taken to reduce the consumption on this switch?
- A. Migrate L3Outs to another switch
- B. Disable Remote EP Learning
- C. Disable IP Data Plane Learning
- D. Disable VRF Policy Control Enforcement
Answer: C
NEW QUESTION 26
Cisco ACI fabric is migrated from network-centric mode to application-centric mode. What is possible in an application-centric design?
- A. migration of bare metal servers to virtual machines
- B. remapping of VLAN pools
- C. creation of additional EPGs under one bridge domain
- D. Cisco ACI VMM integration with hypervisors
Answer: C
Explanation:
Section: Traditional network with ACI
Explanation/Reference:
NEW QUESTION 27
Refer to the exhibit.
What must be configured in the service graph to redirect HTTP traffic between the EPG client and EPG server to go through the Cisco ASA firewall?
- A. precise filter to allow only HTTP traffic
- B. permit-all contract filter
- C. contract filter to allow ARP and HTTP
- D. contract with no filter
Answer: C
NEW QUESTION 28
Refer to the exhibit.
How are the STP BPDUs forwarded over Cisco ACI fabric?
- A. STP BPDUs that are generated by Switch1 are received only by Switch3.
- B. STP BPDUs that are generated by Switch2 are received by Switch1 and Switch3.
- C. Cisco ACI fabric drops all STP BPDUs that are generated by the external switches.
- D. Cisco ACI acts as the STP root for all three external switches.
Answer: B
NEW QUESTION 29
What is a use of the Overlay Multicast TEP in Cisco ACI Multi-Site communication?
- A. to send and receive unicast VXLAN data plane traffic
- B. to act as the source IP for BUM traffic
- C. to perform headend replication
- D. to establish MP-BGP adjacencies with remote spines
Answer: B
NEW QUESTION 30
Refer to the exhibit.
How is the ARP request from VM1 forwarded when VM2 is not learned in the Cisco ACI fabric?
- A. Leaf 101 forwards the ARP request to one of the proxy VTEP spines.
- B. POD1 spine responds to the ARP request after the POD1 COOP is updated with the VM2 location.
- C. Leaf 101 switch consumes the ARP reply of VM2 to update the local endpoint table.
- D. Leaf 101 encapsulates the ARP request into a multicast packet that is destined to 225.0.37.192.
Answer: A
NEW QUESTION 31
A cloud provider must make a pair of firewalls available to all tenants. Each tenant defines its own service graph. Where should the Layer 4 to Layer 7 service be configured to accomplish this goal?
- A. management tenant
- B. common tenant
- C. user tenant
- D. infrastructure tenant
Answer: C
NEW QUESTION 32
Refer to the exhibit.
Between Cisco UCS Fls and Cisco ACI leaf switches, CDP is disabled, the LLDP is enabled, and LACP is in Active mode. Which two discovery protocols and load-balancing mechanism combinations can be implemented for the DVS? (Choose two.)
- A. CDP disabled, LLDP enabled, and LACP Passive
- B. CDP enabled, LLDP disabled, and MAC Pinning
- C. CDP enabled, LLDP disabled, and LACP Passive
- D. CDP enabled, LLDP disabled, and LACP Active
- E. CDP disabled, LLDP enabled, and MAC Pinning
- F. CDP enabled, LLDP enabled, and LACP Active
Answer: C,E
NEW QUESTION 33
An engineer must migrate servers from a legacy data center infrastructure to a Cisco ACI fabric. Drag and drop the steps from the left into the order that they must be completed on the right to ensure the least amount of downtime.
Answer:
Explanation:
NEW QUESTION 34
An engineer designs a Cisco ACI Multi-Pod solution that requires a pair of active-standby firewalls in different pods for external connectivity. How should the firewalls be implemented?
- A. routed firewall for the default gateway
- B. PBR for routed firewalls
- C. transparent firewalls
- D. separate L3Out peerings for routed firewalls
Answer: C
Explanation:
Section: Multipod
Explanation/Reference: https://www.cisco.com/c/en/us/solutions/collateral/data-center-virtualization/application-centric- infrastructure/white-paper-c11-739571.html
NEW QUESTION 35
What is the purpose of the Forwarding Tag (FTAG) in Cisco ACI?
- A. FTAG trees in Cisco ACI are used to load balance mutli-destination traffic.
- B. FTAG is used in Cisco ACI to add a label to the iVXLAN traffic in the fabric to apply the correct policy.
- C. FTAG trees in Cisco ACI are used to load balance unicast traffic.
- D. FTAG is used in Cisco ACI to add a label to the VXLAN traffic in the fabric to apply the correct policy.
Answer: A
Explanation:
Section: ACI Packet Forwarding
Explanation/Reference: https://www.cisco.com/c/en/us/td/docs/switches/datacenter/aci/apic/sw/1-x/aci-fundamentals/ b_ACI-Fundamentals/b_ACI- Fundamentals_chapter_010010.html#concept_1E8BF286E1C043EF839D80935FDF9F50
NEW QUESTION 36 
Refer to the exhibit. A customer experiences resource overconsumption on one of its border leaf switches.
Which action should be taken to reduce the consumption on this switch?
- A. Migrate L3Outs to another switch
- B. Disable Remote EP Learning
- C. Disable IP Data Plane Learning
- D. Disable VRF Policy Control Enforcement
Answer: C
Explanation:
Section: Advanced ACI Policies and Integrations
NEW QUESTION 37
......
Understanding useful and specialized parts of CISCO 300-630 Implementation of Application Centric Infrastructure Advanced (DCACIA)
The accompanying will be examined in CISCO 300-630 exam dumps:
- Cisco Application Centric Infrastructure Multi-Pod Overview
- Tenant Configuration Deployment from Multi-Site Orchestrator (MSO)
- Multi-Site Stretched Components
- Multi-Pod Provisioning and Packet Flow Between Pods
- Service Node Integration Considerations
- Cisco Application Centric Infrastructure Multi-Site Orchestrator
- Cisco Application Centric Infrastructure Multi-Site Deployment
- Connectivity to External L3 Networks
- Service Graph Considerations
How to Prepare for CISCO 300-630 Implementation of Application Centric Infrastructure Advanced (DCACIA)
Preparation Guide for CISCO 300-630 Implementation of Application Centric Infrastructure Advanced (DCACIA)
Introduction for CISCO 300-630 Implementation of Application Centric Infrastructure Advanced (DCACIA)
The CISCO 300-630 Implementation of Application Centric Infrastructure Advanced (DCACIA) test reveals to you the most ideal approach to facilitate the limits of the Cisco Nexus 9000 Series Switches in Cisco Application Centric Infrastructure (Cisco Application Centric Infrastructure) mode. You will sort out some way to plan and administer Cisco Nexus 9000 Series Switches in ACI mode giving overhauled the chiefs and methodology framework, close by the shows used in the fundamental surface. The test moreover covers how to use Cisco Application Centric Infrastructure as a plan driven course of action that fuses programming and gear, and directions to execute Cisco Application Centric Infrastructure Multi-Pod and Multi-Site plans. You will secure included work on completing front line ACI limits, for instance, Rogue CISCO Endpoint Feature, Transit Routing, Configure & Test VRF Route Leaking, Assesing Contracts and Multi-Zoning Rules. This also includes Policy Based Redirect to Multi-Pod Fabric and ACI Orchestrator.
Cisco 300-630 Application Centric Infrastructure (DCACIA 300-630) is an approx 90 minutes test related with the Cisco Certified Specialist - ACI Advanced Implementation authentication. Thistest a candidate's general data and capacities of Cisco switches in ACI mode including course of action, execution, the board, and exploring.
With this test you will really need to:
- Leverage the coordination programming and gear answers for develop the limits of worker ranch and cloud associations
- Learn best practices for executing and managing Cisco Nexus 9000 Series Switches in Cisco Application Centric Infrastructure mode
- Maximize the upsides of an application-driven approach to manage pass on robotization and versatility in IT benefits, and automate surface association and arrangement
To totally benefit by this test, you should have the going with data and capacities:
- Basic understanding of Cisco Application Centric Infrastructure
- Understanding of Cisco worker ranch designing
- Familiarity with virtualization fundamentals
Ensuing to stepping through this exam, you should have the alternative to:
- Understand the nuances and considered completing and planning regular association with Cisco Application Centric Infrastructure
- Describe Cisco Application Centric Infrastructure Multi-Site plan
- Integrate Cisco Application Centric Infrastructure advanced surface pack sending
- Configure Cisco Application Centric Infrastructure Service Graph Policy-Based Redirect (PBR)
We offer CISCO 300-630 practice exam and CISCO 300-630 practice exams for the best insight.
300-630 Exam Dumps - 100% Marks In 300-630 Exam: https://www.verifieddumps.com/300-630-valid-exam-braindumps.html
Verified 300-630 Exam Questions Certain Success: https://drive.google.com/open?id=1Wwp8eCDWl-1RAgtrj-8Caf7X5uxJVlaT
