New (2021) Network Appliance NS0-173 Exam Dumps
Best Way To Study For Network Appliance NS0-173 Exam Brilliant NS0-173 Exam Questions PDF
Network Appliance NS0-173 Exam Syllabus Topics:
| Topic | Details |
|---|---|
| Topic 1 |
|
| Topic 2 |
|
| Topic 3 |
|
| Topic 5 |
|
NEW QUESTION 33
Which port type would you configure when you connect a chassis to the Cisco Fabric Interconnects?
- A. FC storage ports
- B. server ports
- C. appliance ports
- D. Ethernet uplink ports
Answer: A
NEW QUESTION 34
After you install a FlexPod infrastructure at a customer site, you need to migrate the existing Vmware virtual machines off the infrastructure that was used before FlexPod was installed.
Which VMware vSphere feature accomplishes this task?
- A. vSphere DRS
- B. VM Component Protection
- C. vSphere HA
- D. vMotion
Answer: D
NEW QUESTION 35
A customer is designing a FlexPod Datacenter with Cisco UCS C-Series servers. They intend to manage the solution with Cisco UCS Manager. They want to cable the servers to the Cisco UCS Fabric Interconnects.
In this scenario, which three configurations are supported? (Choose three.)
- A. Multipath mode
- B. DualWire Management mode
- C. SingleConnect mode
- D. Cluster mode
- E. Direct Connect mode
Answer: B,C,E
Explanation:
Dual-wire Management (Shared LOM): Shared LAN on Motherboard (LOM) ports on the rack server are used exclusively for carrying management traffic. A separate cable connected to one of the ports on the PCIe card carries the data traffic. Using two separate cables for managing data traffic and management traffic is also referred to as dual-wire management.
SingleConnect (Sideband): Using Network Controller Sideband Interface (NC-SI), the Cisco VIC card connects one cable that can carry both data traffic and management traffic. This feature is referred to as SingleConnect.
Direct Connect Mode: Cisco UCS Manager supports an option to connect the Cisco UCS C-Series Rack- Mount Server directly to the FIs. This option enables Cisco UCS Manager to manage the Cisco UCS C- Series Rack-Mount Servers using a single cable for both management traffic and data traffic. The Cisco UCS VIC connects to the FI of the system. This connection uses a single connection from each VIC to each FI.
Reference:
https://www.cisco.com/c/en/us/td/docs/unified_computing/ucs/c-series_integration/ucsm4-0/b_C-Series- Integration_UCSM4-0/b_C-Series-Integration_UCSM4-0_chapter_01.html
NEW QUESTION 36
A customer with a FlexPod Express solution wants to enable remote access to the NetApp storage component.
In this scenario, which two access methods are recommended? (Choose two.)
- A. SSH
- B. SAML
- C. RDP
- D. Telnet
Answer: A,D
NEW QUESTION 37
A customer has deployed a FlexPod Datacenter with Red Hat Enterprise Linux OpenStack Platform. The Cinder storage volumes that are attached to the Nova instances are not available.
Based on the terms of the cooperative support model, which three companies would the customer use to open a support case? (Choose three.)
- A. NetApp
- B. VMware
- C. Red Hat
- D. Cisco
- E. Microsoft
Answer: A,C,D
NEW QUESTION 38
A FlexPod administrator is building a WWN pool for a server that has 33 ports.
In this scenario, what is the smallest size possible for the pool?
- A. 0
- B. 1
- C. 2
- D. 3
Answer: A
NEW QUESTION 39
Which Cisco Nexus series switch supports NX-OS standalone mode or Application Centric Infrastructure (ACI) fabric mode?
- A. Nexus 9000
- B. Nexus 5000
- C. Nexus 7000
- D. Nexus 3000
Answer: A
NEW QUESTION 40
A client has a FlexPod Datacenter solution with four active fabric links in port channel mode established between the Cisco Fabric Interconnects and the IOMs on a Cisco 5108 blade chassis. The blade chassis is fully populated with Cisco UCS B200M5 blades. A worker in the data center inadvertently unplugs the fourth uplink cable from IOM-A while working in the rack.
In this scenario, what happens to the network traffic?
- A. Traffic is load-balanced within IOM-B.
- B. Traffic is load-balanced within IOM-A.
- C. There is a loss of connectivity for servers 4 and 8.
- D. Connectivity for servers 3, 4, 7, and 8 all fail over to IOM-B.
Answer: D
NEW QUESTION 41
When FCoE is configured in a FlexPod environment, which step is required?
- A. Create a VSAN to support FCoE for the FC uplink.
- B. Assign a VSAN to the server uplink port on the Cisco Fabric Interconnects.
- C. Assign a VLAN to the FC Uplink port on the Cisco Fabric Interconnects.
- D. Create a VSAN within service profiles.
Answer: B
NEW QUESTION 42
Click the Exhibit button.
You are designing a FlexPod Datacenter solution for Microsoft Windows 2012 with Hyper-V. All hosts will boot from the SAN, including management hosts. The management hosts are Cisco C-Series servers.
Referring to the exhibit, which adapters are required to boot the management servers from the SAN?
- A. two 10GbE CNAs
- B. two 10GbE NICs
- C. two 1GbE NICs
- D. two 8Gb HBAs
Answer: B
NEW QUESTION 43
You are configuring a FlexPod system for NAS protocols. You want to ensure that there are multiple paths between the initiators and targets in the solution.
Which two steps will accomplish this task? (Choose two.)
- A. Disable LACP.
- B. Configure the VLANs in Cisco UCS Manager as Common/Global.
- C. Allow the VLANs over the vPC peer link.
- D. Configure the VSANs in the Cisco Nexus 5000 switches.
Answer: A,B
NEW QUESTION 44
A FlexPod solution has been configured for iSCSI SAN boot with multiple paths between the server and the storage.
In this scenario, how many initiators (IQNs) per server will need to be added in the corresponding igroup in ONTAP?
- A. one
- B. four
- C. two
- D. three
Answer: B
Explanation:
The initator group REST API allows you to create, update, delete, and discover initiator groups, and add and remove initiators that can access the target and associated LUNs.
NEW QUESTION 45
A service provider is designing a FlexPod configuration to host multiple customers in a hybrid cloud environment, where IP address-range conflicts might arise on the shared storage.
Which NetApp feature should be enabled to prevent these conflicts?
- A. SVMs
- B. broadcast domains
- C. failover groups
- D. IPspaces
Answer: D
NEW QUESTION 46
What are characteristics of the Cisco UCS 5108 blade chassis?
- A. 4 RU, 8 half-width UCS B-series blades, 40 Gbps I/O bandwidth
- B. 4 RU, 6 half-width UCS B-Series blades, 160 Gbps I/O bandwidth
- C. 6 RU, 8 half-width UCS B-series blades, 160 Gbps I/O bandwidth
- D. 6 RU, 6 half-width UCS B-series blades, 80 Gbps I/O bandwidth
Answer: C
NEW QUESTION 47
A customer is designing a FlexPod solution to use both NFS and iSCSI for connectivity, including traditional FC for legacy applications. The Cisco UCS Fabric Interconnects will be connected to both Nexus 9000 Series switches and FC switches.
Which UCS capability allows you to accomplish this task?
- A. unified ports
- B. FC uplink ports
- C. VSANs
- D. SAN pin groups
Answer: A
NEW QUESTION 48
A customer is designing a FlexPod solution with VMware 6.x in a SAN boot environment using FCoE. The customer has predetermined the WWPN values for the NetApp LIFs and the UCS vHBAs. The customer is now working on the design workflow for the SAN boot process.
In this scenario, which three FlexPod environment objects are required for SAN connectivity? (Choose three.)
- A. NetApp export policies
- B. UCS boot policies
- C. FC zones
- D. UCS IQN pools
- E. initiator groups
Answer: A,B,D
NEW QUESTION 49
A customer wants to extend a Layer 2 network over a Layer 3 Nexus 9000 infrastructure.
Which Layer 2 overlay scheme accomplishes this task?
- A. STP
- B. VXLAN
- C. vPC
- D. EIGRP
Answer: B
Explanation:
XLAN tunnels the Layer 2 network over the Layer.
NEW QUESTION 50
A customer has a FlexPod Express configuration with a FAS2720 system. The company has opened a new remote location and will purchase a FlexPod Express configuration with a FAS2750 system. The business requires that the data be replicated to the new location.
Which two software applications accomplish this task? (Choose two.)
- A. FlexCache
- B. SnapVault
- C. SnapMirror
- D. SnapRestore
Answer: A,C
Explanation:
FlexClone®: Instant virtual copies with file and volume granularity
SnapMirror®: Integrated data replication technology for simple, efficient, flexible disaster recovery and backup use cases
NEW QUESTION 51
Click the Exhibit button.
A customer wants to ensure that FlexPod Datacenter connections to the storage layer are highly available. Which two configurations shown in the exhibit satisfy the customer's requirements? (Choose two.)
- A. II.
- B. IV
- C. I.
- D. III.
Answer: B,D
NEW QUESTION 52
A customer wants to configure SAN boot for its FlexPod system. The customer must consider the minimum number of FC ports to be configured on each node in the ONTAP storage solution.
In this scenario, what is the minimum number of FC ports that should be configured per storage node?
- A. three
- B. one
- C. four
- D. two
Answer: A
NEW QUESTION 53
A customer wants to deploy FlexPod for a VDI solution with 10,000 users, each with 10 GB of storage allocated.
To support this configuration, which three components must be sized? (Choose three.)
- A. the fabric interconnect ports
- B. the Cisco UCS servers
- C. the optical cable length
- D. the NetApp AFF storage
- E. the 1GbE ports from user systems
Answer: A,B,E
NEW QUESTION 54
A customer is planning to deploy a FlexPod solution for a large scale SAN requirement that uses the FC protocol. The customer plans to use Smart Zoning in the configurations to reduce the number of TCAM entries in the zoning process.
In this scenario, which design would enable the customer to use Smart Zoning?
- A. storage connected to Cisco MDS switches
- B. storage connected to Cisco Nexus 5000 Series switches
- C. storage directly connected to Cisco UCS Fabric Interconnects
- D. storage connected to Cisco Nexus 9000 Series switches
Answer: A
NEW QUESTION 55
......
Updated Verified Pass NS0-173 Exam - Real Questions & Answers: https://www.verifieddumps.com/NS0-173-valid-exam-braindumps.html
