New 2024 C1000-058 Dumps for IBM Certified System Administrator Certified Exam Questions and Answer
Realistic Verified C1000-058 exam dumps Q&As - C1000-058 Free Update
The C1000-058 exam tests candidates on their understanding of IBM MQ V9.1 system administration, including topics such as installation and configuration, security, performance tuning, troubleshooting, and backup and recovery. Passing C1000-058 exam demonstrates that a candidate has the skills and knowledge required to manage IBM MQ V9.1 systems effectively, and it can be a valuable credential for professionals seeking career advancement or new job opportunities in this field.
IBM C1000-058 (IBM MQ V9.1 System Administration) Certification Exam is designed for IT professionals who want to demonstrate their expertise in managing and administering messaging middleware solutions. C1000-058 exam validates the skills of candidates in configuring, securing, and monitoring IBM MQ V9.1 systems to ensure reliable and efficient communication between applications and systems. Candidates who pass C1000-058 exam are recognized as IBM certified professionals, which opens up new career opportunities and validates their knowledge of IBM MQ administration.
NEW QUESTION # 13
Due to a hardware failure, a queue manager stops. Both the queue manager configuration and log data are lost. The queue manager is unable to restart or to be recovered from the log. In this situation, what can the administrator do to restore service?
Response:
- A. Mount a new file system and move queue files onto new hardware.
- B. Use the strmqm -s command to start queue manager in safe mode.
- C. Use media recovery to restore damaged objects.
- D. Recreate the queue manager and all of its objects from previously saved definitions.
Answer: D
NEW QUESTION # 14
An administrator has a new application that sends 2MB messages to a remote queue manager, which is significantly larger than current messages which are 50KB. How can an administrator ensure minimal impact on the existing environment?
Response:
- A. Use separate channels and transmit queues for the new messages.
- B. Set MSGGROUP to TRUE and MSGSIZE to a value of 2MB.
- C. Set the workload balancing option to MIXEDSIZE.
- D. Require the queue manager to use message chunking.
Answer: A
NEW QUESTION # 15
In application triggering what is the role of trigger monitor process?
Response:
- A. It monitors the application queue and when the trigger conditions are met and issues a command to start an application.
- B. It monitors the transmission queue and based on trigger message issues a command to start an application.
- C. It monitors the application queue and when the trigger conditions are met, it creates a message and puts it on initiation queue.
- D. It monitors the initiation queue and based on trigger message issues a command to start an application.
Answer: D
NEW QUESTION # 16
Which statement describes an MQl channel?
Response:
- A. A unidirectional communications link that connects an application to a queue manager.
- B. A unidirectional communications link between two queue managers.
- C. A bidirectional communications link between two queue managers.
- D. A bidirectional communications link that connects an application to a queue manager.
Answer: D
NEW QUESTION # 17
An application is being implemented that required a connection to an MQ queue manager. Where can the queue manager be located relative to the application to achieve this?
Response:
- A. It can be either local or remote.
- B. It must be remote from the application.
- C. It must be local to the application.
- D. It can be either local or remote, but must use a requester channel for connection.
Answer: A
NEW QUESTION # 18
It is suspected that a poor programming technique has been used in coding an application that uses an MQ queue (Q1). The application puts a high volume of small messages to the queue. It has been observed that when the application is running, server CPU resource usage increases sharply.
Which command(s) will provide the administrator with the data needed to confirm or reject the poor programming technique?
Response:
- A. ALTER QLOCAL(Q1) ACCTQ(QMGR)ALTER QMGR ACCTINT(10) ACCTQ(NONE)
- B. ALTER QMGR STATMQI(ON)
- C. ALTER QMGR STATCHL(ON) STATQ(NONE)ALTER QLOCAL(Q1) STATQ (QMGR)
- D. ALTER QLOCAL(Q1) STATMQI(ON)
Answer: C
NEW QUESTION # 19
QM1 is a multi-instance queue manager on server1 and server2. Currently, it is NOT running. What is the effect of executing strmqm -x QM1 on server1?
Response:
- A. QM1 becomes an active instance on server2.
- B. QM1 becomes an active instance on server1 and a standby instance on server2.
- C. QM1 becomes an active instance on server1.
- D. QM1 becomes an active instance on server2 and a standby instance on server1.
Answer: B
NEW QUESTION # 20
Given the following error on an MQ server: AMQ7280: WebSphere MQ queue manager 'x' appears unresponsive ln what file extension can this error be found?
Response:
- A. *.FDC
- B. *.FST
- C. *.ERR
- D. *.ALR
Answer: A
NEW QUESTION # 21
An administrator executes the following control command: crtmqm -q -d Q2 QM1 What is the effect of the above command?
Response:
- A. The command creates default queue manager QM1 and specifies Q2 as its default transmission queue.
- B. The command creates queue manager QM1, queue Q2, and specifies Q2 as its dead letter queue.
- C. The command creates default queue manager QM1 and specifies Q2 as its dead letter queue.
- D. The command creates queue manager QM1, queue Q2, and specifies Q2 as its default transmission queue.
Answer: B
NEW QUESTION # 22
What command is used to find out which channel is expected to process the transmission queue QM2?
Response:
- A. DIS CHANNEL (QM1.TO.QM2) ALL
- B. DIS CHANNEL (*) ALL (WHERE XMITQ EQ QM2)
- C. DIS CHANNEL(*) WHERE(XMITQ EQ QM2)
- D. DIS CHANNEL (MQM) WHERE(QMGR EQ QM2)
Answer: C
NEW QUESTION # 23
What is the extension is used for IBM MQ FFST reports?
Response:
- A. ffst
- B. fdc
- C. fst
- D. dmp
Answer: B
NEW QUESTION # 24
An application is putting messages in an MQ cluster but the messages are only routed to the local queue manager to which the application is connected.
What parameter should the administrator adjust to achieve a desired round-robin delivery f messages throughout the cluster?
Response:
- A. CLWLUSEQ should be set to SHARE
- B. MSGDLVSQ should be set to ANY
- C. MSGDLVSQ should be set to SHARE
- D. CLWLUSEQ should be set to ANY
Answer: D
NEW QUESTION # 25
Queue managers QM1, QM2, QM3 are part of the cluster called MYCluster. Cluster queue Q1 only has one instance hosted on QM1. An administrator has issues a following command on QM1:
SUSPEND QMGR CLUSTER(MYCLUSTER)
An application connects to QM2 and pushes a message on Q1. Where does the message arrive?
Response:
- A. On the queue Q1 on QM1
- B. The application receives queue not available message
- C. On the dead letter queue of QM2
- D. On the dead letter queue of QM1
Answer: A
NEW QUESTION # 26
An existing application periodically announces price changes by putting messages to a queue. To make the price messages available as publications without changing the application, the output queue has been deleted and replaced with a queue alias that has TARGTYPE(TOPIC) TARGET('PRICES').
Which authorization is required to allow the application to publish using the new alias?
Response:
- A. Grant +put to the alias only
- B. Grant +put to the alias and to each of the subscriber queues
- C. Grant +put to the alias and +pub to the PRICES topic object
- D. Grant +pub to the alias and +pub to the PRICES topic object
Answer: D
NEW QUESTION # 27
What topic attribute/value pair controls delivery of all non-persistent publications to all subscribers?
Response:
- A. PUBDLV(NPSISTALL)
- B. MSGDLV(NPSISTALL)
- C. NPPUBDLV(ALL)
- D. NPMSGDLV(ALL)
Answer: D
NEW QUESTION # 28
A failed MQ on z/OS request is received with a reason code 'MQRC_STORAGE_MEDIUM_FULL'. What are two reasons for this type of failure?
(Select two.)
Response:
- A. Application are offline
- B. Buffer pool has reached the limit
- C. There is not enough space remaining on the page set
- D. Cannot write to the disk
- E. The coupling facility is full
Answer: C,D
NEW QUESTION # 29
An administrator has been asked to make changes to MQ config so that the MQ client application APP_A connecting to queue manager QM1 can reconnect automatically without re-starting the applications.
What does the administrator need to configure to achieve this?
Response:
- A. Configure DefRecon attribute of CHANNELS stanza in mqclient.ini
- B. Configure AutoConnect attribute of CHANNELS stanza in mqclient.ini
- C. Alter QMGR and set the attribute RECONN(YES)
- D. Alter SVRCONN channel and set attribute AUTOCONN(TRUE)
Answer: A
NEW QUESTION # 30
......
Use Real C1000-058 Dumps - 100% Free C1000-058 Exam Dumps: https://www.verifieddumps.com/C1000-058-valid-exam-braindumps.html
C1000-058 Exam Dumps, Test Engine Practice Test Questions: https://drive.google.com/open?id=1HnuVl5Kylgi7DgJKvcvMc2_Dyn4Ff_cB
