[Nov 29, 2021] New 201 Exam Dumps with High Passing Rate [Q137-Q156]

Share

[Nov 29, 2021] New 201 Exam Dumps with High Passing Rate

Get 201 Braindumps & 201 Real Exam Questions


Understanding of functional and technical aspects of Troubleshooting basic device management connectivity issues

The following will be discussed in this section:

  • Given the use of a remote authentication server, verify proper DNS and NTP settings in order to diagnose a connectivity issue
  • Determine whether a filter is enabled
  • Interpret a packet filter rule list in a given situation
  • Check and interpret port lockdown settings and packet filters in order to determine the cause of a management connectivity issue to a Self-IP

Understanding of functional and technical aspects of Maintaining system configuration

The following will be discussed in this section:

  • Create and restore a UCS archive under the appropriate circumstances
  • Given a proposed virtual server configuration change, outline the scope of the change and for which connections those changes will affect (active connections, new connections, persisted sessions)
  • Explain how to create a user U/A
  • Given a situation where a virtual server configuration change did not appear to immediately take effect, determine why
  • Identify which high-level tasks can be automated using BIG-IQ
  • Identify which modules are licensed and/or provisioned U/A
  • Understand the processes of licensing, license reactivation, and license modification (add-ons)
  • Determine use cases for forcing down a member
  • Given a description of an application, identify the correct virtual server configured for it (HTTP/HTTPS, TCP/UDP, VLANsenabled, route-domain)
  • Manage software images
  • Determine use cases for disabling a member
  • Articulate the characteristics of a pool member that has been disabled or forced offline (Such as for new connections, persisted connections, etc.)

 

NEW QUESTION 137
Refer to the exhibit.

A pool member fails the monitor checks for about 30 minutes and then starts passing the monitor checks. New traffic is Not being sent to the pool member.
What is the likely reason for this problem?

  • A. The pool member is disabled
  • B. Time Until Up is zero
  • C. Monitor Type is TCP Half Open
  • D. Manual resume is enabled

Answer: D

 

NEW QUESTION 138
Which three properties can be assigned to nodes. (Choose three.)

  • A. priority values
  • B. ratio values
  • C. health monitors
  • D. connection limits
  • E. loadElbalancing mode

Answer: B,C,D

 

NEW QUESTION 139
Refer to the exhibit.

An LTM device has a virtual server mapped to www.f5.com. Users report that when they connect to
/resources/201.1.2h.l_l.com they are unable to receive content.
What is the likely cause of the issue?

  • A. The pool associated with the virtual server does not have priority group activation enabled.
  • B. The pool associated with the virtual server is falling its health check.
  • C. The virtual address does not have ARP enabled.
  • D. The virtual address does not have route advertising enabled.

Answer: C

 

NEW QUESTION 140
During a maintenance window, an EUD test was executed and the output displayed on the screen. The BIG-IP Administrator did NOT save the screen output. The BIG-IP device is currently handling business critical traffic. The BIG-IP Administrator needs to minimize impact. What should the BIG-IP Administrator do to provide the EUD results to F5 Support?

  • A. Boot the device into EUD then collect output from console
  • B. Collect file /var/log/messages
  • C. Collect file /shared/log/eud.log
  • D. Execute EUD from tmsh and collect output from console

Answer: C

 

NEW QUESTION 141
Where is persistence mirroring configured.

  • A. It is part of a pool definition.
  • B. It is part of a profile definition.
  • C. It is part of a virtual server definition.
  • D. It is always enabled.

Answer: B

 

NEW QUESTION 142
A local user account (Users) on the BIG-IP device is assigned the User Manager role. Userl attempts to modify the properties of another account (User2), but the action fails. The BIG-IP Administrator can successfully modify the User2 account.
Assuming the principle of least privilege, what is the correct way to allow User 1 to modify User2 properties?

  • A. Modify the partition access for User 1
  • B. Grant User1 administrative privileges
  • C. Move User2 to the same partition as User1
  • D. Move User to the same partition as User2.

Answer: A

 

NEW QUESTION 143
When can a single virtual server be associated with multiple profiles.

  • A. Often. Profiles work on different layers and combining profiles is common.
  • B. Unlimited. Profiles can work together in any combination to ensure that all traffic types are supported in a given virtual server.
  • C. Rarely. One combination, using both the TCP and HTTP profile does occur, but it is the exception.
  • D. Never. Each virtual server has a maximum of one profile.

Answer: A

 

NEW QUESTION 144
A BIG-IP Administrator reviews the log files to determine the cause of a recent problem and finds the following entry.
Mar 27.07.58.48 local/BIG-IP notice mcpd {5140} 010707275 Pool member 172.16.20.1.10029 monitor status down.
What is the cause of this log message?

  • A. The monitor attached to the pool member needs a higher timeout value.
  • B. The pool member has been marked as Down by the BIG-IP Administrator.
  • C. The pool member has been disabled.
  • D. The monitor attached to the pool member has failed.

Answer: D

 

NEW QUESTION 145
Refer to the exhibit.


During maintenance, the BIG-IP Administrator manually disables a pool member as shown.
What is the result?

  • A. The disabled pool member stops processing existing connections
  • B. All pool members continue to process persistent connections
  • C. All pool members stop accepting new connections.
  • D. The disabled pool member stops processing persistent connections.

Answer: B

 

NEW QUESTION 146
A BIG-IP Administrator needs to view the CPU utilization of a particular Virtual Server. Which section of the Configuration Utility should the administrator use for this purpose?

  • A. Statistics > Analytics > Process CPU Utilization
  • B. Statistics > Module Statistics > Local Traffic > Virtual Servers
  • C. Statistics > Module Statistics > Local Traffic > Virtual Addresses
  • D. Statistics > Module Statistics > Traffic Summary

Answer: B

 

NEW QUESTION 147
Which three methods can be used for initial access to a BIGElIP system. (Choose three.)

  • A. HTTP access to any of the switch ports
  • B. SSH access to any of the switch ports
  • C. SSH access to the management port
  • D. CLI access to the serial console port
  • E. HTTPS access to the management port
  • F. HTTPS access to any of the switch ports
  • G. HTTP access to the management port

Answer: C,D,E

 

NEW QUESTION 148
A virtual server is configured to offload SSL from a pool of backend servers. When users connect to the virtual server, they successfully establish an SSL connection but no content is displayed. A packet trace performed on the server shows that the server receives and responds to the request. What should a BIG-IP Administrator do to resolve the problem?

  • A. enable Server SSL profile
  • B. disable Server SSL profile
  • C. disable SNAT
  • D. enable SNAT

Answer: B

 

NEW QUESTION 149
The interface 1.1 of the BIG-IP device has been connected to a link dedicated to traffic on VLAN 120. What should the BIG-IP Administrator do to receive traffic from the VLAN?

  • A. Create a new trunk object and assign it to the VLAN
  • B. Create a new trunk object with interface 1.1 assigned
  • C. Create a new VLAN object and assign the interface 1.1 untagged
  • D. Create a new VLAN object and set Customer Tag to 120

Answer: C

 

NEW QUESTION 150
Which statement describes a typical purpose of iRules.

  • A. iRules can be used to update the timers
    on monitors
    as a server load changes.iRules can be used to update the timers on monitors as a server. load changes.
  • B. iRules can be used to look at client requests and server responses to choose a pool member to select for load balancing
  • C. iRules can be used to add individual control characters to an HTTP data stream.
  • D. iRules can examine
    a server response and
    remove
    it from a pool if the response is unexpectediRules can examine a server. response and remove it from a pool if the response is unexpected

Answer: C

 

NEW QUESTION 151
A virtual server at 10.10.1.100:80 has the rule listed below applied. when HTTP_REQUEST { if {[HTTP::uri] ends_with "htm" } { pool pool1 } else if {[HTTP::uri] ends_with "xt" } { pool pool2 } If a user connects to http://10.10.1.100/foo.txt which pool will receive the request?

  • A. pool2
  • B. pool1
  • C. Unknown. The pool cannot be determined from the information provided.
  • D. None. The request will be dropped.

Answer: A

 

NEW QUESTION 152
Refer to the exhibit

A connection is being established to IP 1.1.1.1 on port 8080.
Which virtual server will handle the connection?

  • A. fwdvs
  • B. host_vs
  • C. host_ 8080_VS
  • D. fwd_8080_vs

Answer: B

 

NEW QUESTION 153
How is MAC masquerading configured.

  • A. Specify the desired MAC address for each floating selfElIP address for which you want this feature enabled.
  • B. Specify the desired MAC address for each selfElIP address for which you want this feature enabled.
  • C. Specify the desired MAC address for each VLAN for which you want this feature enabled.
  • D. Specify the desired MAC address for each VLAN on the active system and synchronize the systems.

Answer: C

 

NEW QUESTION 154
A user wants to use the iHealth Upgrade Advisor to determine any issues with upgrading TMOS from 13.0 to
13.1.
Where can the user generate the QKView to upload to iHealth?

  • A. System > Configuration
  • B. System > Software Management
  • C. System > Support
  • D. System > Archives

Answer: C

 

NEW QUESTION 155
One of the two members of a device group has been decommissioned. The BIG-IP Administrator tries to delete the device group, but is unsuccessful.
Prior to removing the device group, which action should be performed?

  • A. Disable the device group
  • B. Remove the decommissioned device from the device group
  • C. Remove all members from the device group
  • D. Make sure all members of the device group are in sync

Answer: C

 

NEW QUESTION 156
......

201 Dumps To Pass F5 Exam in 24 Hours - VerifiedDumps: https://www.verifieddumps.com/201-valid-exam-braindumps.html

F5 201 Actual Questions and Braindumps: https://drive.google.com/open?id=1tC3gHjqoKMEkCFvX4wvAq1nHmHdonUC_