Pass RedHat EX200 Exam Info and Free Practice Test
New 2024 Latest Questions EX200 Dumps - Use Updated RedHat Exam
NEW QUESTION # 80
Add admin group and set gid=600
Answer:
Explanation:
# groupadd -g 600 admin
NEW QUESTION # 81
Part 1 (on Node1 Server)
Task 17 [Accessing Linux File Systems]
Find all the files owned by user "alex" and redirect the output to /home/alex/files.
Answer:
Explanation:
* root@node1 ~]# find / -user alex -type f > /home/alex/files
NEW QUESTION # 82
CORRECT TEXT
Configure autofs to make sure after login successfully, it has the home directory autofs, which is shared as /rhome/ldapuser40 at the ip: 172.24.40.10. and it also requires that, other ldap users can use the home directory normally.
Answer:
Explanation:
# chkconfig autofs on
# cd /etc/
# vim /etc/auto.master
/rhome /etc/auto.ldap
# cp auto.misc auto.ldap
# vim auto.ladp
ldapuser40 -rw,soft,intr 172.24.40.10:/rhome/ldapuser40
* -rw,soft,intr 172.16.40.10:/rhome/&
# service autofs stop
# server autofs start
# showmount -e 172.24.40.10
# su - ladpuser40
NEW QUESTION # 83
Configure your Host Name, IP Address, Gateway and DNS.
Host name: station.domain40.example.com
/etc/sysconfig/network
hostname=abc.com
hostname abc.com
IP Address:172.24.40.40/24
Gateway172.24.40.1
DNS:172.24.40.1
Answer:
Explanation:
Answer see in the explanation.
Explanation/Reference:
# cd /etc/syscofig/network-scripts/
# ls
# vim ifcfg-eth0 (Configure IP Address, Gateway and DNS) IPADDR=172.24.40.40 GATEWAY=172.24.40.1
DNS1=172.24.40.1
# vim /etc/sysconfig/network
(Configure Host Name)
HOSTNAME= station.domain40.example.com
OR
Graphical Interfaces:
System->Preference->Network Connections (Configure IP Address, Gateway and DNS) Vim /etc/ sysconfig/network
(Configure Host Name)
NEW QUESTION # 84
A YUM source has been provided in the
http://instructor.example.com/pub/rhel6/dvd
Configure your system and can be used normally.
Answer:
Explanation:
see explanation below.
Explanation
* /etc/yum.repos.d/base.repo
[base]
name=base
baseurl=http://instructor.example.com/pub/rhel6/dvd
gpgcheck=0
yum list
NEW QUESTION # 85
Create a logical volume
Create a new logical volume as required:
Name the logical volume as database, belongs to datastore of the volume group, size is 50 PE.
Expansion size of each volume in volume group datastore is 16MB.
Use ext3 to format this new logical volume, this logical volume should automatically mount to /mnt/database
Answer:
Explanation:
fdisk -cu /dev/vda// Create a 1G partition, modified when needed
partx -a /dev/vda
pvcreate /dev/vdax
vgcreate datastore /dev/vdax -s 16M
lvcreate- l 50 -n database datastore
mkfs.ext3 /dev/datastore/database
mkdir /mnt/database
mount /dev/datastore/database /mnt/database/ df -Th
vi /etc/fstab
/dev/datastore /database /mnt/database/ ext3 defaults 0 0 mount -a
Restart and check all the questions requirements.
NEW QUESTION # 86
SIMULATION
Add a swap partition.
Adding an extra 500M swap partition to your system, this swap partition should mount automatically when the system starts up. Don't remove and modify the existing swap partitions on your system.
Answer:
Explanation:
See explanation below.
Explanation/Reference:
Explanation:
fdisk -cu /dev/vda// in the way of expanding the partition, don't make main partition partx -a /dev/vda mkswap /dev/vdax swapon /dev/vdax swapon -s vi /etc/fstab
/dev/vdaxswapswapdefaults0 0
mount -a
NEW QUESTION # 87
Upgrade the kernel, start the new kernel by default. kernel download from this address:
ftp://server1.domain10.example.com/pub/update/new.kernel
Answer:
Explanation:
Download the new kernel file and then install it.
[root@desktop8 Desktop]# ls
kernel-2.6.32-71.7.1.el6.x86_64.rpm
kernel-firmware-2.6.32-71.7.1.el6.noarch.rpm
[root@desktop8 Desktop]# rpm -ivh kernel-*
Preparing... ###########################################
[100%]
1:kernel-firmware
########################################### [ 50%]
2:kernel
########################################### [100%]
Verify the grub.conf file, whether use the new kernel as the default boot. [root@desktop8 Desktop]# cat /boot/grub/grub.conf default=0 title Red Hat Enterprise Linux Server (2.6.32-71.7.1.el6.x86_64) root (hd0,0) kernel /vmlinuz-2.6.32-71.7.1.el6.x86_64 ro root=/dev/mapper/vol0-root rd_LVM_LV=vol0/root rd_NO_LUKS rd_NO_MD rd_NO_DM LANG=en_US.UTF-8 SYSFONT=latarcyrheb-sun16 KEYBOARDTYPE=pc KEYTABLE=us crashkernel=auto rhgb quiet initrd /initramfs-2.6.32-71.7.1.el6.x86_64.img
NEW QUESTION # 88
Part 2 (on Node2 Server)
Task 3 [Managing Logical Volumes]
Create a new volume group in the name of datavg and physical volume extent is 16 MB Create a new logical volume in the name of datalv with the size of 250 extents and file system must xfs Then the logical volume should be mounted automatically mounted under /data at system boot time
Answer:
Explanation:
* [root@node2 ~]# lsblk
NAME MAJ:MIN RM SIZE RO TYPE MOUNTPOINT
vdb 252:16 0 5G 0 disk
└─vdb1 252:17 0 4.2G 0 part
└─vgrz-lvrz 253:2 0 4.1G 0 lvm /datarz
vdc 252:32 0 5G 0 disk
vdd 252:48 0 5G 0 disk
vde 252:64 0 10G 0 disk
[root@node2 ~]# parted /dev/vdc mklabel msdos
[root@node2 ~]# parted /dev/vdc mkpart primary 1MiB 4200MiB
[root@node2 ~]# parted /dev/vdc set 1 lvm on
* [root@node2 ~]# udevadm settle
[root@node2 ~]# pvcreate /dev/vdc1
Physical volume "/dev/vdc1" successfully created.
[root@node2 ~]# vgcreate -s 16M datavg /dev/vdc1
Volume group "datavg" successfully created
[root@node2 ~]# lvcreate -n datalv -L 4000M datavg
Logical volume "datalv" created.
[root@node2 ~]# mkfs.xfs /dev/datavg/datalv
[root@node2 ~]# mkdir /data
[root@node2 ~]# blkid
/dev/mapper/datavg-datalv: UUID="7397a292-d67d-4632-941e-382e2bd922ce" BLOCK_SIZE="512" TYPE="xfs"
* [root@node2 ~]# vim /etc/fstab
UUID=7397a292-d67d-4632-941e-382e2bd922ce /data xfs defaults 0 0
[root@node2 ~]# mount UUID=7397a292-d67d-4632-941e-382e2bd922ce /data
[root@node2 ~]# reboot
[root@node2 ~]# df -hT
Filesystem Type Size Used Avail Use% Mounted on
/dev/mapper/datavg-datalv xfs 3.9G 61M 3.9G 2% /data
NEW QUESTION # 89
Change the logical volume capacity named vo from 190M to 300M. and the size of the floating range should set between 280 and 320. (This logical volume has been mounted in advance.)
Answer:
Explanation:
Answer see in the explanation.
Explanation/Reference:
# vgdisplay
(Check the capacity of vg, if the capacity is not enough, need to create pv , vgextend , lvextend)
# lvdisplay (Check lv)
# lvextend -L +110M /dev/vg2/lv2
# resize2fs /dev/vg2/lv2
mount -a
(Verify)
------------------------------------------------------------------------------- (Decrease lvm)
# umount /media
# fsck -f /dev/vg2/lv2
# resize2fs -f /dev/vg2/lv2 100M
# lvreduce -L 100M /dev/vg2/lv2
# mount -a
# lvdisplay (Verify)
OR
# e2fsck -f /dev/vg1/lvm02
# resize2fs -f /dev/vg1/lvm02
# mount /dev/vg1/lvm01 /mnt
# lvreduce -L 1G -n /dev/vg1/lvm02
# lvdisplay (Verify)
NEW QUESTION # 90
SELinux must run in force mode.
Answer:
Explanation:
see explanation below.
Explanation
/etc/sysconfig/selinux
SELINUX=enforcing
NEW QUESTION # 91
What implications does container virtualization have for DevOps? (Choose two answers.)
- A. Containers decouple the packaging of an application from its infrastructure.
- B. Containers let developers test their software under production conditions.
- C. Containers require developers to have detailed knowledge of their IT infrastructure.
- D. Containers require application specific adjustment to the container platform.
- E. Containers complicate the deployment of software and require early deployment tests.
Answer: A,B
Explanation:
Explanation/Reference:
Reference http://anandmanisankar.com/posts/container-docker-PaaS-microservices/
NEW QUESTION # 92
Configure your NFS services. Share the directory by the NFS Shared services.
Answer:
Explanation:
/etc/init.d/rpcbind start
/etc/init.d/nfslock start
/etc/init.d/nfs start
chkconfig rpcbind on
chkconfig nfslock on
chkconfig nfs on
showmount -e localhost
NEW QUESTION # 93
You have a domain named www.rhce.com associated IP address is 192.100.0.2. Configure the Apache web server by implementing the SSL for encryption communication.
Answer:
Explanation:
see explanation below.
Explanation
* vi /etc/httpd/conf.d/ssl.conf <VirtualHost 192.100.0.2> ServerName www.rhce.com DocumentRoot
/var/www/rhce DirectoryIndex index.html index.htm ServerAdmin [email protected] SSLEngine on SSLCertificateFile /etc/httpd/conf/ssl.crt/server.crt SSLCertificateKeyFile
/etc/httpd/conf/ssl.key/server.key </VirtualHost>
* cd /etc/httpd/conf
3 make testcert
* Create the directory and index page on specified path. (Index page can download from ftp://server1.example.com at exam time)
* service httpd start|restart
* chkconfig httpd on
Apache can provide encrypted communications using SSL (Secure Socket Layer). To make use of encrypted communication, a client must request to https protocol, which is uses port 443. For HTTPS protocol required the certificate file and key file.
NEW QUESTION # 94
SIMULATION
Please open the ip_forward, and take effect permanently.
Answer:
Explanation:
See explanation below.
Explanation/Reference:
Explanation:
vim /etc/sysctl.conf net.ipv4.ip_forward = 1
sysctl -w (takes effect immediately)
If no "sysctl.conf" option, use these commands:
sysctl -a |grep net.ipv4
sysctl -P net.ipv4.ip_forward = 1
sysctl -w
NEW QUESTION # 95
Make on data that only the user owner and group owner member can fully access.
Answer:
Explanation:
see explanation below.
Explanation
* chmod 770 /data
* Verify using : ls -ld /data Preview should be like:
drwxrwx--- 2 root sysadmin 4096 Mar 16 18:08 /data
To change the permission on directory we use the chmod command.
According to the question that only the owner user (root) and group member (sysadmin) can fully access the directory so: chmod 770 /data
NEW QUESTION # 96
......
Latest EX200 Exam Dumps RedHat Exam: https://www.verifieddumps.com/EX200-valid-exam-braindumps.html
Pass RedHat EX200 PDF Dumps Recently Updated 136 Questions: https://drive.google.com/open?id=1W1c80wom9V_Sn4C_HwJ26GzPys7jI89e
