Use the best ways of preparing for HPE0-S22 Exam Dumps with VerifiedDumps HP HPE0-S22 dump PDF [2021]
HP HPE0-S22 exam candidates will surely pass the Exam if they consider the HPE0-S22 dumps learning material presented by VerifiedDumps.
NEW QUESTION 10
An architect proposes an HPE Moonshot 1500 chassis with m710p cartridges, an HPE
Moonshot 45XGc Switch, and an HPE 4-QSFP+Uplink Module. The customer informs the architect that each cartridge requires a redundant 10GbE link.
How should the architect change the proposal?
- A. Change the HPE Moonshot 45XGc Switch to an HPE Moonshot 180G switch.
- B. Change the 4-QSFP+Uplink Module to a 16-SFP+ Uplink Module.
- C. Add another HPE Moonshot 45XGc Switch and 4-QSFP+Uplink Module.
- D. Add another FlexibleLOM adapter for each cartridge.
Answer: D
NEW QUESTION 11
An architect is choosing between 1GbE and 10GbE connectivity for an object storage solution.
What is a valid reason to select 10GbE?
- A. The customer's network infrastructure is based on QoS service.
- B. The customer needs the system to recover quickly from a failure.
- C. The customer needs the object storage servers to be able to locate random data on a disk more quickly.
- D. The customer plans to increase the memory in the nodes in the future.
Answer: C
NEW QUESTION 12
A customer needs a hosted physical desktop solution. Users will run typical oꢀice applications with limited use of some media-rich applications such as Adobe Photoshop. The customer needs the densest and most cost-effective solution that can support such users.
Which HPE Moonshot cartridge should the architect recommend?
- A. HPE m400
- B. HPE m710
- C. HPE m710p
- D. HPE m700
Answer: C
Explanation:
Explanation/Reference:
Reference https://www.hpe.com/us/en/product-catalog/servers/moonshot-systems/pip.hpe-proliant-m710p- server-cartridge.8732043.html
NEW QUESTION 13
An architect is planning an HPE Moonshot solution with m710p cartridges. The customer's application requires cartridge nodes to connect to a NAS. The customer's current infrastructure supports 10GbE. In the future, the customer plans to upgrade the fabric between the HPE Moonshot and the NAS solution to support 40GbE.
Which switch modules and uplink modules should the architect recommend to meet both the current and future needs?
- A. HPE Moonshot 45XG Switch Modules and HPE Moonshot 16-SPF+ Uplink Modules
- B. HPE Moonshot 180G Switch Modules and HPE Moonshot 4-QPPF+ Uplink Modules
- C. HPE Moonshot 180G Switch Modules and HPE Moonshot 16-SFP+ Uplink Modules
- D. HPE Moonshot 45XGc Switch Modules and HPE Moonshot 4-QSFP+ Uplink Modules
Answer: D
NEW QUESTION 14
An architect is planning an HPE Moonshot System solution to support a data analytics application. The application uses data mining.
Which type of rack configuration should the architect recommend?
- A. a configuration that balances the ratio of HPE Moonshot Systems to HPE Apollo 4200 servers, which store the data
- B. a configuration that has a higher ratio of HPE Moonshot Systems to HPE Apollo 4200 servers, which store the data
- C. a configuration in which the HPE Moonshot System hosts the analytics application and the data
- D. a configuration that has a lower ratio of HPE Moonshot Systems to HPE Apollo 4200 servers, which store the data
Answer: A
NEW QUESTION 15
A customer has an HPE Integrity Superdome X system with an nPartition that has been provisioned with a supported OS and application.
What first detects data corruption caused by an installed DIMM module?
- A. the application using the data
- B. the XNC2 controller in the internal fabric
- C. the Superdome X firmware
- D. the OS installed on the nPartition
Answer: C
Explanation:
Explanation
NEW QUESTION 16
How does the HPE c7000 BladeSystem's use of network infrastructure compare with the HPE Apollo 6000's?
- A. The HPE c7000 BladeSystem offers greater port consolidation.
- B. The HPE Apollo 6000 uses fewer network ports per server.
- C. The HPE Apollo 6000 offers greater per server connectivity.
- D. The HPE c7000 BladeSystem offers less port variety.
Answer: D
NEW QUESTION 17
An architect is designing an HPE Apollo 6000 solution to support a customer application. The architect is choosing between the HPE ProLiant XL230a and the XL250a compute tray.
What is one reason for choosing the XL250a tray?
- A. The application requires high storage capacity.
- B. The application requires GPU acceleration.
- C. The application uses high amounts of memory.
- D. The application is single-threaded.
Answer: B
NEW QUESTION 18
An architect needs to scope the number of required m710p cartridges for video transcoding. The architect plans to aim for an additional 20 to 25 percent growth capacity.
In addition to this growth capacity, which factors will determine the number of required cartridges? (Choose two.)
- A. the number of formats to which to convert
- B. the amount of storage capacity required
- C. the amount of memory required
- D. the number of video streams required
- E. the number and type of processors
Answer: B,D
NEW QUESTION 19
An architect is planning an HPE Moonshot System solution to support a data analytics application. The application uses data mining.
Which type of rack configuration should the architect recommend?
- A. a configuration that balances the ratio of HPE Moonshot Systems to HPE Apollo 4200 servers, which store the data
- B. a configuration that has a higher ratio of HPE Moonshot Systems to HPE Apollo 4200 servers, which store the data
- C. a configuration in which the HPE Moonshot System hosts the analytics application and the data
- D. a configuration that has a lower ratio of HPE Moonshot Systems to HPE Apollo 4200 servers, which store the data
Answer: A
NEW QUESTION 20
View the Exhibit.
Refer to the exhibit. An architect is planning an HPE Moonshot System with m710 cartridges to support a customer application virtualization solution. The customer indicated that the maximum acceptable response time for the solution is three seconds. The architect has implemented a POC and tested a single cartridge with different numbers of user sessions.
The architect monitored resource utilization throughout the tests. The results of the test with the point at which the response time exceeded three seconds are shown, marked as the "VSI max." What should the architect conclude from this test?
- A. CPU becomes a limiting factor around 50 sessions, so the architect should propose at least one cartridge per 45 or 50 users.
- B. None of the monitored resources shows signs of being a bottleneck, so the architect should consider other factors such as the HPE Moonshot switch module.
- C. The memory becomes a bottleneck before other resources, so the architect should propose m400 cartridges, which provide a higher memory capacity.
- D. The network adapter becomes a bottleneck before other resources, so the architect should propose m710p cartridges, which provide 10GbE ports.
Answer: D
NEW QUESTION 21
An architect finds several vulnerabilities with a customer's digital enterprise that could lead to data loss on a third-party storage system for critical business segments.
Which solution should the architect propose to help the customer to protect their digital enterprise?
- A. an HPE StoreOnce solution configured to take backups of the critical data from the third-party storage
- B. an HPE StoreVirtual solution configured as a secondary node to replicate the critical data on the third- party storage
- C. an HPE 3PAR StoreServ solution configured to peer persistence with the third-party storage to protect the critical data
- D. an HPE StoreAll solution configured to migrate the critical data to object-based storage
Answer: C
NEW QUESTION 22
A customer plans to develop scripts that use the REST API for HPE OneView. However, the customer is concerned about the complexity of the scripts.
Which tool can be used to adopt the HPE OneView REST API quicker?
- A. HPE Python library for HPE OneView
- B. HPE iLO4 using RedFish
- C. HPE Operations Analytics for HPE OneView
- D. HPE SmartStart Scripting Toolkit
Answer: C
NEW QUESTION 23
DRAG DROP
Select all that apply.
Click and drag the Network Interface on the left to match it with its HPE Server Family on the right.
Select and Place:
Answer:
Explanation:
NEW QUESTION 24
An architect is planning an HPE Moonshot System solution to support a data analytics application. The application uses data mining.
Which type of rack configuration should the architect recommend?
- A. a configuration that has a higher ratio of HPE Moonshot Systems to HPE Apollo 4200 servers, which store the data
- B. a configuration that balances the ratio of HPE Moonshot Systems to HPE Apollo 4200 servers, which store the data
- C. a configuration in which the HPE Moonshot System hosts the analytics application and the data
- D. a configuration that has a lower ratio of HPE Moonshot Systems to HPE Apollo 4200 servers, which store the data
Answer: A
NEW QUESTION 25
A customer has a large Oracle-based ERP solution that runs on HPUX and multiple rx2800 i2 servers. The customer plans to move to an open source solution to reduce operating expenses. The customer needs the ability to deliver incremental capacity and needs to avoid incremental Oracle licensing costs.
Which HPE Server solution will help meet the customer's needs?
- A. HPE Superdome X
- B. HPE BladeSystem c7000 with BL460G Gen9 Servers
- C. HPE Apollo 6000 System
- D. HPE Apollo 4500 System
Answer: A
Explanation:
Explanation/Reference:
Reference https://www.hpe.com/h20195/v2/GetPDF.aspx/4AA6-5294ENN.pdf (page 5)
NEW QUESTION 26
Which network infrastructure components should an architect consider when recommending 40GbE in a server solution?
- A. OM2 cables can be reused for runs of 50 meters or less
- B. Cables will need to be replaced by multi strand MPO cables
- C. OM4 cables can be reused for all runs out to the maximum of 300 meters
- D. Multimode cables will all need to be replaced by single mode cables
Answer: B
Explanation:
Explanation/Reference:
NEW QUESTION 27
An architect plans to propose a solution and illustrate how it will reduce the predictable and repeatable costs for items and services not registered as assets.
Which reporting period information helps the architect achieve this goal?
- A. internal rate of return (IRR)
- B. operating expenditure (OPEX)
- C. total cost of acquisition (TCA)
- D. gross profit (GP)
Answer: B
NEW QUESTION 28
......
Accurate & Verified Answers As Seen in the Real Exam here: https://www.verifieddumps.com/HPE0-S22-valid-exam-braindumps.html
