The Most In-Demand HP HPE0-S59 Pass Guaranteed Quiz
New Version HPE0-S59 Certificate & Helpful Exam Dumps is Online
NEW QUESTION # 32
An administrator tries to open iLO interlace from HPE OneView Instead of being automatically logged in a login prompt displays Where should you start the troubleshooting process?
- A. At the iLO interface to verify whether the ILO Advanced license is properly applied
- B. At HPE OneView Interface to verify whether the server is In the maintenance mode
- C. At HPE OneView Interface to verify whether the iLO processor is disabled
- D. At the iLO interface to verify whether the SSO certificate is removed from an iLO.
Answer: A
NEW QUESTION # 33
You need to configure a RoCE network to enable lossless networking for HPE J2000 Flash Enclosure support Which interconnects are required to support this connection? (Select two.)
- A. Brocade 32Gb Fibre Channel SAN Switch Module for HPE Synergy
- B. Brocade 16Gb Fibfe Channel SAN Switch Module for HPE Synergy
- C. HPE Virtual Connect SE 16Gb FC Module for HPE Synergy
- D. HPE Virtual Connect SE 40Gb F8 Module for HPE Synergy
- E. HPE Virtual Connect SE 100Gb F32 Module for HPE Synergy
- F. HPE Virtual Connect SE 32Gb FC Module for HPE Synergy
Answer: C,F
NEW QUESTION # 34
Which statement about an HPE Oneview support dump is true?
- A. Support dump is a binary file that can be opened only in a dedicated application
- B. Support dump can be created if HPE Virtual Connect modules are installed in the frame
- C. Appliance support dump by default contains a logical enclosure support dump
- D. Preview support dump is available only when creating an appliance support dump
Answer: A
NEW QUESTION # 35
Your customer has the following HPE Synergy setup
- 3 HPE Synergy 12000 Frames
- 4 HPE Virtual Connect SE 100 Gb F32 Modules
- 2 HPE Synergy 50 GO Interconnect Link Modules
- 36 HPE Synergy 480 Gen10 Plus compute modules
- 2 HPE Composer 2 modules
Which statement about this setup is true?
- A. To use all compute nodes, the customer must create at least two logical enclosures
- B. The customer must buy 36 HPE OneView Advanced licenses to manage compute modules
- C. The customer can add one D3940 storage Module to each of the frames
- D. To manage all frames, the customer must buy two additional HPE Composer 2 modules
Answer: B
NEW QUESTION # 36
Refer to the exhibit.
Which statement about this logical JBOD is true?
- A. After deleting this logical JBOD, its drives w not be available until a clean-up procedure 6 done
- B. After deleting this logical JBOD drives will he blocked for 12h m case this JBOD must be re-created
- C. This logical JBOD can be connected to multiple systems to formulate a snared datastore.
- D. This logical JBOD can be presented to the compute nodes in a different frame.
Answer: A
NEW QUESTION # 37
Match each HPE OneView network type with its definition.
Answer:
Explanation:
NEW QUESTION # 38
Your customer has an HPE Synergy platform deployed and managed using HPE OneView. The customer also has HPE Superdome Flex with RMC deployed They plan to deploy a second nPar and HPE Superdome Flex
280 They plan to manage new components using HPE OneView
What must be done to achieve this goal?
- A. The customer must use IL05 to add HPE Superdome Flex systems to HPE OneView
- B. The customer has to add HPE Superdome Flex to the HPE OneView used to manage HPE Synergy
- C. The customer must add a second Rack Management Controller for HPE Superdome Flex 280
- D. The customer should deploy an HPE OneView appliance for HPE Superdome Flex management
Answer: C
NEW QUESTION # 39
What is a restriction of using a RoCE network?
- A. It is by default configured as an untagged network and cannot be a part of a network set.
- B. it is not supported with HPE Virtual Connect SE 40 GD F8 Module for HPE Synergy.
- C. It does not support smart link and private network features.
- D. It does not support Private VLAN and Multicast VLAN.
Answer: A
NEW QUESTION # 40
Your customer plans to use HPE OneView for VMware vCenter Server to deploy ESXi systems. They created a server profile template that they want to use in HPE OneView.
Put the steps required to configure HPE OneView for VMware vCenter Server on the left into their correct order on the right.
Answer:
Explanation:
NEW QUESTION # 41
You need to setup HPE Synergy frames after hardware components are discovered within HPE OneView.
Put the steps to achieve this goal into the coned order in the answer area on the right.
Answer:
Explanation:
NEW QUESTION # 42
You configured a vVoI datastore using HPE Storage integration Pack for VMware vCenter.
Which storage object should you check using SSMC to verify whether vVol datastore is configured property?
- A. Storage Container
- B. App Volume Set
- C. virtual Volume
- D. Virtual Volume Set
Answer: D
NEW QUESTION # 43
Your customer has an HPE Synergy frame equipped with a D3940 Storage Module. Each of the compute nodes has an appropriate storage controller Installed and two 12Gb SAS switches installed in the first fabric.
The customer reports that compute nodes cannot access the storage module. What should you verify first when troubleshooting this problem?
- A. If there Is a logical interconnect created based on the 12Gb SAS switches.
- B. If there is at least one ISCSI network configured that will provide access to the module.
- C. If the D3940 module is imported in managed state that allows volume provisioning.
- D. If the D3940 storage module is property licensed through HPE OneView interface.
Answer: C
NEW QUESTION # 44
Your customer plans to deploy HPE OneView for VMware vCenter Server together with HPE Storage Integration Pack for VMware vCenter. The customer wants to use them to manage HPE Synergy Gen10 compute modules. HPE ProLiant Gen 10 servers and an MSA array.
Which statement about compatibility of the existing environment with the planned software components is true?
- A. To use the required plugins HPE ProLiant Gen10 systems must be managed using HPE OneView
- B. HPE Storage integration Pack for VMware vCenter does not support MSA arrays
- C. Both HPE Synergy Gen10 full-height compute module plugins will require a license
- D. HPE OneView for VMware vCenter Server does not support standalone HPE ProLiant servers
Answer: D
NEW QUESTION # 45
Which statement about HPE Apollo 2000 Gen10 Plus platform is true?
- A. It offers servers with AMD EPYC and Intel Xeon Scalable CPUs
- B. It is equipped with HPE Persistent memory by default
- C. It is fully managed using HPE OneView including all connections
- D. It can support a single processor only and up to 4 per chassis
Answer: D
NEW QUESTION # 46
Your customer wants to compare HPE Superdome Flex with HPE Superdome Flex 280.
Which statement about these two systems is true?
- A. Only HPE Superdome Flex 280 can support multiple nPars
- B. Only HPE Superdome Flex supports HPE Persistent Memory
- C. Only HPE Superdome Flex supports 32 sockets and 48TB of memory
- D. Only HPE Superdome Rex 280 can be managed using HPE OneView
Answer: D
NEW QUESTION # 47
Which statement about HPE OneView milestone releases is true?
- A. A milestone release is a release with an enhanced update architecture mat is a prerequisite prior to updating to a subsequent release.
- B. A milestone release is a release that is published when HPE releases new hardware components to immediately support new systems
- C. A milestone release is available for selected partners that give access to HPE OneView features which are not officially announced.
- D. A milestone release is a release which must be installed on HPE Composer to support current version of the Service Pack for Synergy
Answer: D
NEW QUESTION # 48
Match each HPE Synergy logical component with the definition.
Answer:
Explanation:
NEW QUESTION # 49
Which statement about a new HPE SimpliVity deployment is true?
- A. All new HPE SimpliVity models are based on AMD CPUs
- B. New HPE SimpliVity deployments are licensed per node not per physical socket
- C. New HPE SimpliVity deployments give customer flexible choice of hypervisor
- D. All new HPE SimpliVity models support deduplication and compression
Answer: D
NEW QUESTION # 50
Your customer plans to deploy HPE Superdome Flex and configure two nPars, each based on two chassis Which components must be included in the proposal to meet the customer's needs?
- A. HPE Superdome Flex Grid licenses enabling connectivity between chassis
- B. Rack Management Controller for nPar management
- C. At least Tour HPE Persistent Memory DIMMs per nPar
- D. One base chassis and three expansion chassis with licenses
Answer: D
NEW QUESTION # 51
Your customer plans to deploy a VMware ESXi with HPE Synergy platform. They plan to use Distributed Switches and DRS cluster You are preparing a proposal with the following components:
- HPE Synergy frame with ten HPE Synergy 480 Gen10 Plus compute modules
- two HPE Virtual Connect SE 100Gb F32 Modules for Synergy
- an appropriate number of the vSphere Standard licenses for each compute node
- one HPE D3940 Storage Modules with 40 SSDs - all required cables and options Which statement about this proposal is true?
- A. 2 additional HPE Synergy 480 Gen10 Plus compute modules can be added to this setup
- B. vSphere Standard licenses should be replaced with Enterprise Pius licenses to enable requested features
- C. One HPE Virtual Connect SE 100Gb F32 Module for Synergy should be replaced with 50GD/S ILM
- D. 20 SSD drives should be removed from this setup, as D3940 supports only 20 SSD or SAS drive.
Answer: B
NEW QUESTION # 52
What is one of me benefits of using HPE Composer 2?
- A. HPE Composer 2 has 128GB of memory and 4 AMD CPUs to improve performance of me management system
- B. HPE Composer 2 modules are required to manage HPE virtual Connect SE 100GD F32 Modules for Synergy
- C. The administrator can access an HPE Synergy Composer 2 appliance remotely to perform First Time Setup
- D. A pair of HPE Composer 2 modules can manage 42 frames, compared to 21 frames managed by HPE Composer
Answer: A
NEW QUESTION # 53
Which HPE Virtual Connect feature allows an administrator to suppress excessive inbound multicast broadcast and destination lookup failure (OLF) packets?
- A. Pause flood protection
- B. LLDP tagging
- C. Storm control
- D. Loop protection
Answer: C
NEW QUESTION # 54
Which statement about manual orchestration during the firmware update is true?
- A. It provides an ability to select and update one side of the Interconnect topology at a time
- B. It allows all the interconnect modules to be activated manually at the same time.
- C. It is supported only for logical enclosures with at least three frames
- D. It provides the ability to install an older firmware version than currently Installed In the interconnect
Answer: A
NEW QUESTION # 55
......
To prepare for the HP HPE0-S59 exam, candidates can take advantage of various training resources, including instructor-led courses, online courses, and self-study materials. These resources cover topics such as HPE ProLiant Gen10 servers, HPE Synergy composable infrastructure, and HPE OneView management software.
HPE0-S59 Free Certification Exam Material with 60 Q&As : https://www.verifieddumps.com/HPE0-S59-valid-exam-braindumps.html
UPDATED HPE0-S59 Exam Questions Certification Test Engine to PDF: https://drive.google.com/open?id=1lShlRO1IchDw3CdbJWxLRFQIqOboA1Kb
