VerifiedDumps C-IBP-2211 Dumps PDF - 100% Passing Guarantee
C-IBP-2211 Braindumps Real Exam Updated on Jan 10, 2024 with 80 Questions
NEW QUESTION # 29
Which constraints are taken into account by the Time-Series-Based Supply Planning Heuristic (Infinite)?Note: There are 3 correct answers to this question.
- A. Transportation lead times
- B. Minimum lot size
- C. Aggregated constraints
- D. Maximum lot size
- E. Adjusted transport receipts
Answer: A,B,E
NEW QUESTION # 30
Which of the following key functions are supported by SAP IBP for sales and operations?Note: There are
2 correct answers to this question.
- A. Multi-Level Supply Planning Heuristics
- B. Scenario analysis for operational supply planning
- C. Time series analysis
- D. Simple statistical forecast
Answer: A,D
NEW QUESTION # 31
You are working on a mid-range plan that spans the seasonal peak and you are evaluating the need for additional crewing.Which of the following parameters can you model to plan production with extra shift(s)?
- A. Capacity expansion with additional costs
- B. Production source validity at the start of seasonal peak
- C. Incremental production values
- D. Adjusted production interactive values
Answer: A
NEW QUESTION # 32
What are the S&OP operator (optimizer) parameters associated with demand fair share?
- A. Number of fair share segments Maximum days of coverage Number of fair share segments late delivery
- B. Number of fair share segments Additional tiering costs (default) Inventory days of supply
- C. Number of fair share segments Additional tiering costs (default) Maximum inventory
- D. Number of fair share segments Additional tiering costs (default) Number of fair share segments late delivery
Answer: D
NEW QUESTION # 33
Which of the following approaches could you take to reduce run times of an optimizer?Note: There are
3 correct answers to this question.
- A. Increase the use of incremental lot size beyond the frozen horizon.
- B. Keep the number of fairshare segments small.
- C. Use non-overlapping networks by using subnetwork ID maintained at Location-Products to reduce the size of the problem.
- D. Avoid using telescopic time buckets.
- E. Split into multiple planning areas to support weekly vs. daily planning needs.
Answer: C,D,E
NEW QUESTION # 34
Forecast Error CV is an input to which of the following?
- A. Calculate Target Inventory Components in Inventory Planning Profile Operator
- B. Multistage Inventory Optimization in Inventory Planning Profile Operator
- C. Time-Series-Based Supply Planning Optimizer
- D. Forecast Error Calculation in Inventory Planning Profile Operator
Answer: B
NEW QUESTION # 35
For which of the following application jobs can you enter planning filters as parameters?Note: There are
2 correct answers to this question.
- A. Purge Non-Conforming Data
- B. Create Time Periods for Time Profiles
- C. Purge Key Figure Data
- D. Purge Master Data
Answer: C,D
NEW QUESTION # 36
Which of these conditions must be met to create a Local Member key figure?Note: There are 2 correct answers to this question.
- A. Use Excel Cell References in the Report Editor option is selected.
- B. Users should have authorization for template administration.
- C. A key figure is selected in the Key Figures tab in the SAP IBP, add-in for Microsoft Excel.
- D. Activate Local Member Recognition setting is selected.
Answer: B,D
NEW QUESTION # 37
What do you need to be aware of when using multiple pairs of key figures in one copy operator? Note:
There are 2 correct answers to this question.
- A. Copying multiple key figures on different planning levels is not possible.
- B. Copying multiple key figures can be processed sequentially.
- C. If necessary source key figures values are disaggregated.
- D. If necessary target key figures values are disaggregated.
Answer: B,D
NEW QUESTION # 38
Safety Stock outputs from Multistage Inventory Optimization are sent to which of these processes? Note: There are 2 correct answers to this question.
- A. Supply Heuristics in SAP IBP for sales and operations
- B. Charts creation in SAP Supply Chain Control Tower
- C. Demand Sensing with Gradient Boosting (Full)
- D. Decoupling Points determination in SAP IBP for demand-driven replenishment
Answer: A,C
NEW QUESTION # 39
Which pre-processing steps can be used to cleanse historical sales data before generating a statistical forecast in SAP IBP?Note: There are 2 correct answers to this question.
- A. Promotion Sales Lift Elimination
- B. Substitute Missing with Mean or Median in Sales History
- C. Intermittency Detection and Correction in Sales History
- D. Bias Detection and Correction in Sales History
Answer: A,B
NEW QUESTION # 40
Which SAP IBP planning operator can be run to delete planning objects in a certain version?
- A. Purge Master Data
- B. Purge Key Figure Data
- C. Purge Key Figure Data Outside Planning Area Planning Horizon
- D. Purge Non-Confirming Data
Answer: B
NEW QUESTION # 41
What does ABC/XYZ segmentation allow you to do?Note: There are 2 correct answers to this question.
- A. Substitute missing values in case of sporadic demands.
- B. Choose time-independent key figures as segmentation measures.
- C. Use forecasting algorithms that are specific to seasonal demands of SKUs in the segment "B".
- D. Identify inventory items that require closer attention.
Answer: B,D
NEW QUESTION # 42
What are some of the prerequisites for configuring a planning area that results in a successful consistency check?Note: There are 2 correct answers to this question.
- A. Specify a planning horizon in the planning area for each level of the assigned time profile.
- B. Configure at most two input key figures on the same planning level in a key figure calculation.
- C. Assign the compound master data type and its component master data types.
- D. Configure at least one calculated key figure for the planning area.
Answer: A,C
NEW QUESTION # 43
The S&OP Operator Profiles app is used to configure different types of algorithms.Which algorithm- specific settings are unique for only the Time Series-based Supply Optimizer?Note: There are 2 correct answers to this question.
- A. Discretization
- B. Processing mode
- C. Global cost factors
- D. Time profile level
Answer: B,C
NEW QUESTION # 44
You have set up a planning area, and data is now available. You adjust the necessary time profile settings and run a consistency check.Which settings can you change and still run a successful consistency check?Note: There are 2 correct answers to this question.
- A. Change the description of the attributes in the time profile.
- B. Add a new time profile level to the time profile.
- C. Change the past and future horizon of the levels in the time profile.
- D. Change the numbering hierarchy of the period IDs in the time profile.
Answer: A,C
NEW QUESTION # 45
You need to make manual adjustments to your S&OP plan.Which are possible ways of making these changes?Note: There are 2 correct answers to this question.
- A. Leveraging the web-based planning capability
- B. Leveraging the functionality of SAP Workzone
- C. Using Microsoft Excel planning views
- D. Using Driver-Based planning
Answer: A,C
NEW QUESTION # 46
Which of the following are features of lag-based snapshots?Note: There are 2 correct answers to this question.
- A. Lag-based snapshots are created in the Configuration app for a fixed time range.
- B. Target key figures for these snapshots must have lag as a root attribute in its base planning level.
- C. Target key figures for these snapshots are exposed to the user in planning views.
- D. The number of lag-based snapshots are limited to nine levels.
Answer: A,B
NEW QUESTION # 47
What are some of the properties of filter blocks?Note: There are 3 correct answers to this question.
- A. Filter blocks can be visualized in the Key Figure Calculations app.
- B. Filter blocks are imposed when modeling an attribute as a key figure.
- C. Filter blocks are imposed when modeling attribute transformations.
- D. Filter blocks are imposed when modeling cross-period calculations.
- E. Filter blocks can be visualized in SAP IBP, add-in for Microsoft Excel
Answer: B,C,E
NEW QUESTION # 48
What are the possible ways that an attribute intended for use as an attribute as a key figure can be created and assigned?
- A. Created as type NVARCHAR and assigned to an external master data type
- B. Created as type INTEGER and assigned to a simple master data type
- C. Created as type INTEGER and assigned to a compound master data type
- D. Created as type DECIMAL and assigned to a compound master data type
Answer: D
NEW QUESTION # 49
Which sets of chart types are provided within the Analytics Advanced application?Note: There are 3 correct answers to this question.
- A. Simulation Chart Types
- B. Trend Chart Types
- C. Geographic Chart Types
- D. Seasonal Chart Types
- E. Comparison Chart Types
Answer: B,D,E
NEW QUESTION # 50
You create a planning filter using an SAP IBP Fiori app.Which of the following objects can it be applied to?Note: There are 2 correct answers to this question.
- A. Supply chain graph in Supply Chain Network app
- B. Planning view templates in the SAP IBP add-in for Microsoft Excel
- C. Snapshot operator in the SAP IBP add-in for Microsoft Excel
- D. Jobs in the Applications Jobs app
Answer: B,D
NEW QUESTION # 51
You are reviewing the master data types that are often used for supply and inventory planning
.Which master data types are compound master data types?Note: There are 2 correct answers to this question.
- A. SOURCEPRODUCTION
- B. SOURCECUSTGROUP
- C. SOURCELOCATION
- D. SOURCECUSTOMER
Answer: C,D
NEW QUESTION # 52
You are adding a value-based filter to a planning view.Which of the following conditions apply?Note:
There are 3 correct answers to this question.
- A. You can only apply one value-based filter per planning view.
- B. The alerts dashboard is not available if a value-based filter is set for the open planning view.
- C. These filters can be used together with attribute totals in the same planning view.
- D. You can add (or delete) planning objects to a planning view after these filters are applied.
- E. These filters are always applied based on the values stored in the database.
Answer: A,B,E
NEW QUESTION # 53
A time profile is defined with these levels: day, technical week, week, month, quarter, and year. What condition in configuration will allow you to have a different value in the current week, versus all other time buckets?
- A. IF("PERIODID3" ="$$PERIODID3CU$$...)
- B. IF("PERIODID2" ="$$PERIODID2CU$$...)
- C. IF("PERIODID4" ="$$PERIODID4CU$$...)
- D. IF("PERIODID5" ="$$PERIODID5CU$$...)
Answer: A
NEW QUESTION # 54
......
C-IBP-2211 Dumps With 100% Verified Q&As - Pass Guarantee or Full Refund: https://www.verifieddumps.com/C-IBP-2211-valid-exam-braindumps.html
Latest C-IBP-2211 PDF Dumps & Real Tests Free Updated Today: https://drive.google.com/open?id=1QNJVS-EGYKFkrzxGM2NC-9f1KMhWBpGW
