UPDATED [Dec 21, 2024] Pass Dell VxRail Deploy Exam Exam with Latest Questions
D-VXR-DY-01 Exam Practice Questions prepared by EMC Professionals
NEW QUESTION # 24
You need to create a VxRail JSON file to generate a VxRail As-Built configuration report.
How should you obtain this file?
- A. Generate it from the VxRail PEQ by clicking the Generate NVT/FDC JSON button
- B. Download it from the vSphere client VxRail plug-in - Last Configuration Data Sent
- C. Download it from the VxRail First Run Wizard after a successful validation
- D. Generate it from the VxRail PEQ by clicking the Generate Appliance JSON button
Answer: C
NEW QUESTION # 25
What network protocol is required for a VxRail Management VLAN?
- A. IPv6 Unicast
- B. IPv4 Unicast
- C. IPv6 Multicast
- D. IPv4 Multicast
Answer: C
NEW QUESTION # 26
A customer requires a Stretched VxRail Cluster with S570 nodes in its minimal configuration.
Which setup will fulfill the requirement?
- A. 4+4 nodes
- B. 6+6 nodes
- C. 2+2 nodes
- D. 3+3 nodes
Answer: D
NEW QUESTION # 27
What is a consideration for using link aggregation on the Top of Rack (ToR) switch for a VxRail?
- A. Is not supported on the VxRail ToR switch
- B. Should always be configured for VxRail node ports to allow for failover
- C. Should not be used for VxRail node ports, but can be used for uplink and ISL
- D. Can be configured for any connectivity, but are not required
Answer: C
NEW QUESTION # 28
When using the VxRail Deployment Wizard, what is the correct format to enter the name of a VxRail-deployed vCenter Server?
- A. IP address
- B. Hostname
- C. FQDN
Answer: B
NEW QUESTION # 29
In addition to hardware monitoring, what is the purpose of the Dell PTAgent service on a VxRail node?
- A. VxRail node discovery and software upgrades
- B. BOSS upgrade and firmware installation
- C. Hardware discovery and VxRail VIB installation
- D. Hardware discovery and firmware installation
Answer: D
NEW QUESTION # 30
A new enterprise customer will be deploying VxRail, utilizing an existing vCenter.
Which server will be used to add and validate the host and domain names?
- A. Internal DNS server deployed on node1
- B. Customer external DNS server
- C. Customer external vCenter with host file
- D. Internal DNS server on VxRail Manager
Answer: B
NEW QUESTION # 31
What is validated by running the Proactive VM Creation test in vCenter on a VxRail cluster?
- A. vSAN operates successfully
- B. Network firewalls are configured correctly
- C. Network performance is sufficient
- D. vSAN has sufficient storage capacity
Answer: A
NEW QUESTION # 32
Where can you directly obtain the latest version of the VxRail Appliance PEQ and PEQ Addendum?
- A. Solve Online
- B. https://elabadvisor.psapps.emc.com/licensedtools/download
- C. https://dell.com/support
- D. Solve Desktop Embedded within
Answer: B
NEW QUESTION # 33
You are expanding the capacity of a Hybrid VxRail by creating an additional disk group. The new disk group will be composed of five drives on all participating cluster nodes.
When you attempt to add the new disks to the vSAN datastore you receive an error message about there being no cache tier available.
What is the likely cause?
- A. All the drives are labeled as HDDs
- B. Cluster requires vSAN Advanced or Enterprise license upgrade
- C. You attempted to add the disks to the existing disk group
- D. vSAN supports disk groups with four drives or fewer
Answer: A
NEW QUESTION # 34
A VxRail cluster is being deployed with the VxRail Deployment Wizard.
For which IP addresses must FQDNs be resolved by DNS?
- A. All VxRail ESXi nodes, vCenter Server, and VxRail Manager VM
- B. All VxRail ESXi nodes, vRealize Operation Manager, and VxRail Manager VM
- C. Only the first VxRail ESXi node, vCenter Server, and VxRail Manager VM
- D. vCenter Server and VxRail Manager VM only
Answer: A
NEW QUESTION # 35
What is the minimum VxRail version that supports a SmartFabric configuration on a VxRail Cluster?
- A. 4.7.100
- B. 4.7.000
- C. 4.5.300
- D. 4.5.225
Answer: B
NEW QUESTION # 36
A systems engineer needs to check the health of the nodes and the system VMs to prevent complications or failures during VxRail upgrades.
Which tool must be used to perform the task?
- A. CloudlQ
- B. SolVe Online
- C. VxRail ACE
- D. VxVerify
Answer: D
NEW QUESTION # 37
Which vSAN features are specific to an all-flash model VxRail?
- A. Thin Swap Objects and Stretch Clustering
- B. Deduplication/Compression and Erasure Coding
- C. Deduplication/Compression and Thin Swap Objects
- D. Erasure Coding and Stretch Clustering
Answer: B
NEW QUESTION # 38
How many nodes can be added simultaneously to an existing VxRail cluster running at code version 4.5?
- A. 0
- B. 1
- C. 2
- D. 3
Answer: A
NEW QUESTION # 39
For which typical activity would the No data migration setting be used when placing a VxRail host into maintenance mode?
- A. Shutting down an entire cluster
- B. Permanently removing host from cluster
- C. Relocating host to remote data center
- D. Temporary maintenance
Answer: A
NEW QUESTION # 40
Which VxRail model can only be installed with static rack rails?
- A. G Series
- B. V Series
- C. P Series
- D. S Series
Answer: A
NEW QUESTION # 41
Which VxRail Pre-Installation Site Checklist worksheet is auto-populated?
- A. Begin Here
- B. VxRail Network Configuration
- C. Network Basics
- D. Switch Config Actuals
Answer: C
NEW QUESTION # 42
......
D-VXR-DY-01 Exam Practice Materials Collection: https://www.verifieddumps.com/D-VXR-DY-01-valid-exam-braindumps.html
Use Valid New D-VXR-DY-01 Questions - Top choice Help You Gain Success: https://drive.google.com/open?id=1H8GMDv7n6i4lJgShRYAj_fGn6W3J5UOE
